SCS F-5 wheels 16x8

[Yotaqueen]

Personally, I prefer the look of 3.5" bs on a 3rd gen for some wheel/tire poke. If you like more of the flushed look then consider 4.5" bs. Otherwise 3.5" bs with 265/75/16 would look great with a mild 1.5" lift.

Vin,
Would the 3.5" BS 16x8 with a 265/75/16 fit on stock 99' height(1" raised on the 99).

I want it to have some nice poke but it's a limited with the chonk fender flares and I'm not lifted (yet).

Thanks!

 

[SCSPerformance]

Vin,
Would the 3.5" BS 16x8 with a 265/75/16 fit on stock 99' height(1" raised on the 99).

I want it to have some nice poke but it's a limited with the chonk fender flares and I'm not lifted (yet).

Thanks!

+0 is better suited for a stock to 1" lift.

 

[Yotaqueen]

+0 is better suited for a stock to 1" lift.

Thanks for the quick response!

What limitations have been found? Rubbing on the flares? I plan to do a 2" lift likely next year. Could I get by with cutting some plastic to clear, or is it a no go until 2" lift?

I'm just a big fan of these wheels with a flush look.

 

[SCSPerformance]

Thanks for the quick response!

What limitations have been found? Rubbing on the flares? I plan to do a 2" lift likely next year. Could I get by with cutting some plastic to clear, or is it a no go until 2" lift?

I'm just a big fan of these wheels with a flush look.

Here's +0mm offset with 285s. See how flushed that is. -25mm would poke more.



If you're not afraid to cut and trim as needed then you can probably make it work with a mild lift.

 

[Nuc13arW1nt3r]

Guess the Wheel and Tire Specs!

 

[brendan_bowers]

Hey! Just curious what these specs are??

 

[SCSPerformance]

That's our 17x9 -38mm spec.