SCS wheels - BAY AREA CA

[tristero]

I was concerned that the 17x8.5" might cause some rubbing and another brand with 17x8-0 offset would be safer.... thoughts?

If you have the +4 caster you should be good. I've only been running mine for a few hours, but I'm at +2.8 and I am not rubbing on the body mount yet, but it's close.

I would recommend Vin over and over. Plus you'll love the aggressive stance.

 

[kaatahdin]

Cool, thanks!!

 

[Civiceg94]

Are these going to be for a limited time in this size ?

 

[808DA6]

Kind of an SCS post:

And the best part of day....

Total class. Many thanks to Vin. Can't wait to wrap these in rubber.

-Brian

 

[SCSPerformance]

So, currently I have an Icon Stage 1, 285 duratracs and stock 17x7s. I did remove the mudflaps, and did the front fender liner mod and have no rubbing.

I would really like a wider rims for the 285s than the stock 7" and the scs 17x8.5s look perfect (offset is perfect too).

I was concerned that the 17x8.5" might cause some rubbing and another brand with 17x8-0 offset would be safer.... thoughts?

SCS are the sweetest looking I have seen so far, just don't want to create problems..

If you have the +4 caster you should be good. I've only been running mine for a few hours, but I'm at +2.8 and I am not rubbing on the body mount yet, but it's close.

I would recommend Vin over and over. Plus you'll love the aggressive stance.

Justin offered some great advise. With aftermarket UCAs, you can add more caster to your alignment to shift the front wheels forward just enough to avoid rubbing the body mount area. However, tires vary too much from brand to brand to provide a definite answer. Your best bet is to add as much caster as you can and just consider doing the body mount chop especially if you plan to offroad.

Are these going to be for a limited time in this size ?

Only the gloss silver finish is limited. The 17" size will be in our line up from now on.

Kind of an SCS post:

And the best part of day....

Total class. Many thanks to Vin. Can't wait to wrap these in rubber.

-Brian

You're welcome Brian! I look forward to seeing your setup. Don't hesitate to contact me if you need anything else.

 

[SCSPerformance]

Our new limited finish, matte gunmetal with a machined lip. Better photos coming soon.

 

[carlomagne]

Quick shot after the alignment.

 

[SCSPerformance]

Quick shot after the alignment.

That's fire!

 

[JJ_Stin]

Our new limited finish, matte gunmetal with a machined lip. Better photos coming soon.

Those are nice!
What are they called?

 

[PhdNPrerunners]

Quick shot after the alignment.

Man the F5s look awesome in 17s!

 

[SCSPerformance]

Those are nice!
What are they called?

It's our SR8 model in matte gunmetal with a machined lip.

 

[JJ_Stin]

It's our SR8 model in matte gunmetal with a machined lip.

You have any pictures of those on a silver 4th gen?
I really like those over the 6s.

 

[SCSPerformance]

You have any pictures of those on a silver 4th gen?
I really like those over the 6s.

Sorry, but I don't have any photos of them yet.

 

[Cheers!]

Can the 17" F5s accept the TRD Pro centre cap?

 

[SCSPerformance]

 

[SCSPerformance]

Can the 17" F5s accept the TRD Pro centre cap?

The F5s will not accept any kind of center cap. It was designed to be capless.

 

[tristero]

Some shots I took after the install last week. Thanks again Vin.

 

[Civiceg94]

 

[swtleiu]

how much for the 6 model 16x7 and I'm station put her in pearl harbor, my zip is 0679, thanks ron

 

[ThaPanda510]

Finally got mine installed, loving the look! Thanks Vin!