spitvenom
New member
Ok so I found my dream 4runner, 4x4, MANUAL 5 speed, e locker, leather, moonroof, premium sound, and rear heater and she had 95k when I picked her up, not a spot of rust on her
she was completly stock and the first few things I got were
full respray good quality with 3 hands of clear
yakima roof rack
then I did ALL the maintence and stuff I just wanted to build me a super clean 4runner.
steam clean and undercoat the frame, axels, arms, subframe etc .
all fluids trans/tcase/rear and front diff/engine/brake/coolant/clutch.
front rotors/pads/shims
ball joints
polyurathane steering rack bushings
poly sway bar end links all around
sway bar end links f and r
inner tie rod ends
valve cover gaskets and valve adjustment
grease 5 fittings in driveshaft
adjust clutch
new plugs
degrease engine
Then came the lifting phase
Sonoran steel 1.2 kit with
bilstein 5100 fronts
bilstein 5150 rears
LC 7.5 wraps out back
tundra trd front springs
and all the accesories that come with the kit
Eagle alloy 195 wheels that were discontinued
BFG ta Ko all around with a 5th matching spare
tonnea cover
TRD custom rear decals
front tow shackles
rear tow shackle
front diff drop
ISR mod
deckplate mod
I leatheriqued treatement the leather inside
redid all emblems in black
Satoshi land cruiser custom grill and emblem
JDM black housing lights
HID lights
TRD shift knobs for both shift knobs
AVS front hood deflector
AVS window deflectors
U-joints
CV axel
I also did the SKIDROW 3 plates but havent installed them and I wanted flares which I bough the bushwaker flares and they are now for sale because I dont like how the tires dont stickout passed the flares at all and I think it looks cleaner without flares.
I didnt like the front springs much and bought some toytec 3 inch lift springs as soon as they came back in stock
AFTER COMING BACK FROM PAINT AND ROOF RACK:
NOW:
she was completly stock and the first few things I got were
full respray good quality with 3 hands of clear
yakima roof rack
then I did ALL the maintence and stuff I just wanted to build me a super clean 4runner.
steam clean and undercoat the frame, axels, arms, subframe etc .
all fluids trans/tcase/rear and front diff/engine/brake/coolant/clutch.
front rotors/pads/shims
ball joints
polyurathane steering rack bushings
poly sway bar end links all around
sway bar end links f and r
inner tie rod ends
valve cover gaskets and valve adjustment
grease 5 fittings in driveshaft
adjust clutch
new plugs
degrease engine
Then came the lifting phase
Sonoran steel 1.2 kit with
bilstein 5100 fronts
bilstein 5150 rears
LC 7.5 wraps out back
tundra trd front springs
and all the accesories that come with the kit
Eagle alloy 195 wheels that were discontinued
BFG ta Ko all around with a 5th matching spare
tonnea cover
TRD custom rear decals
front tow shackles
rear tow shackle
front diff drop
ISR mod
deckplate mod
I leatheriqued treatement the leather inside
redid all emblems in black
Satoshi land cruiser custom grill and emblem
JDM black housing lights
HID lights
TRD shift knobs for both shift knobs
AVS front hood deflector
AVS window deflectors
U-joints
CV axel
I also did the SKIDROW 3 plates but havent installed them and I wanted flares which I bough the bushwaker flares and they are now for sale because I dont like how the tires dont stickout passed the flares at all and I think it looks cleaner without flares.
I didnt like the front springs much and bought some toytec 3 inch lift springs as soon as they came back in stock
AFTER COMING BACK FROM PAINT AND ROOF RACK:
NOW: