Spring replacement with the shocks?

[StuckInTheBurbs]

I've got an 06 2wd with only 110k and I'd like to restore the original ride quality so I figured I'd throw some non adjustable 5100s on it. While I'm in there should I go ahead and add new OEM springs? After 12 years even with the relatively low mileage surely there is some sag and wear. Anyone have a suggestion for aftermarket springs that would not give me a lift that may be "better" than the oem springs? Thanks in advance.

 

[radlynx]

are you talking about front or rear? if its not too rusted, you can still reuse it.

Sent from my SM-G930T using Tapatalk

 

[StuckInTheBurbs]

are you talking about front or rear? if its not too rusted, you can still reuse it.

Sent from my SM-G930T using Tapatalk

All 4 corners and no rust. I'm sure it's still re-usable but I guess I'm wondering if it would be a significant increase in ride quality to go ahead and replace while I'm having the 5100s installed.

 

[<<<<]

It would be the same if you use new OEM springs vs current OEM. Keep them.

 

[gaber6]

I'm replacing all my springs for good measure when I do my struts/shocks soon. Fronts are sagged for sure from having a full size brush guard on for 13 years.