SRQ Fab Lift Kit

[906-Runner]

I'm looking at getting the OME lift from SRQ Fab and just wondering what people who have this lift thoughts are. I have no aftermarket bumpers or a winch so I chose the following options;

Front Coils: OME 881: Stock front weight, 2-2.5 inch lift

Rear Coils: OME 881: Stock front weight, 2-2.5 inch lift

Rear Shocks: OME 60028 - Firm Valving

If anyone who has experience with one of these lifts any input would be appreciated. Thank's in advance.

 

[miles.less.traveld]

you wont be running 881 coils in front and rear. I believe 881 are for the front. coil diameters are different. But SRQ is an awesome place to buy, Matt (owner) has been super helpful when I have bought stuff from him in the past.

 

[ColoRAD]

There's a lot of threads and feedback out there about the 881/906 OME lift, poke around a bit and you'll find some good information. I think the general consensus is that the OME shocks are way too stiff but the 881/906 paired with Bilstein 5100's the ride is supposed to be well controlled much more pleasant.

 

[906-Runner]

All right, thanks for the advice

 

[Plastics guy]

I'm looking at getting the OME lift from SRQ Fab and just wondering what people who have this lift thoughts are. I have no aftermarket bumpers or a winch so I chose the following options;

Front Coils: OME 881: Stock front weight, 2-2.5 inch lift

Rear Coils: OME 881: Stock front weight, 2-2.5 inch lift

Rear Shocks: OME 60028 - Firm Valving

If anyone who has experience with one of these lifts any input would be appreciated. Thank's in advance.

Yup the 881/906 is a very common setup. Give SRQ a call they really know there stuff and you will get hooked up with everything you need.

 

[906-Runner]

Yup the 881/906 is a very common setup. Give SRQ a call they really know there stuff and you will get hooked up with everything you need.

So will they also have the top plate and fully assemble my struts for me or would that be something id have to do on my own?

 

[SRQ-Runner]

So will they also have the top plate and fully assemble my struts for me or would that be something id have to do on my own?

Top hats and assembly isn't included with that kit

 

[906-Runner]

Top hats and assembly isn't included with that kit

Thanks for the info, is that something that SRQ has or do I have to get them from another seller?

 

[SRQ-Runner]

Thanks for the info, is that something that SRQ has or do I have to get them from another seller?

We can source top hats for you if you want to get new hats or your stock ones are beat up.

 

[906-Runner]

I know my thread is about the SRQ lift but does anyone have any experience with the rough country lift for our trucks?

Like this one here:
https://www.roughcountry.com/toyota-suspension-lift-kit-771-20.html