Stainless Exhaust tip. Where and Which one?

R

RHINO-99

New member
I have an 06 Sport and really like how the stainless exhaust tip looks on the Limited Edn. What brand is this or where can get the OEM version? How much$?

Does it just slide on over the exhaust tip and tighten down with a nut or clamp?
 
Register to hide this ad
RHINO-99 said:
I have an 06 Sport and really like how the stainless exhaust tip looks on the Limited Edn. What brand is this or where can get the OEM version? How much$?

Does it just slide on over the exhaust tip and tighten down with a nut or clamp?
Click to expand...

Its an accessory that you can get from the dealer. I think its like $65. Its not standard on the Limited, its an option (dealer installed) across all 3 trim levels. My limited did not come with it, and I can't decide if I want to get it or not because I may just get an aftermarket exhaust down the road and then I'll be out $65.
 
I have the TRD tip and the only thing that I don't like is the way the bolt for the clamp sticks out. Makes it look like an add-on.
 
Picked mine up from Advance Auto for about 1/2 the cost of the Dealer installed tip. To be honest, it looks just like the OE one.
DSC02552.jpg~original
 
I got mine from AutoZone for $20... Made by 3A racing kinda ricey but I like it. This is an old pic, but it still looks new when cleaned up. <a href="http://s80.photobucket.com/albums/j195/kjc609/?action=view&current=4runner002.jpg" target="_blank"><img src="http://i80.photobucket.com/albums/j195/kjc609/4runner002.jpg" border="0" alt="Photobucket"></a>
 
1BadGixxer or ALLEGRO,

Can either one of you get a close up shot of the tip? I think I found the one you have, but it looks like the muffler goes in that far(about 3-4 inches?). It also looks like the bolts would stick out pretty far.

Also, any problems w/ the bolts coming loose? Pretty much just slide it over the existing muffler and tighten it? They look nice, but I don't want it falling off one day. haha

Thanks in advance!
 
Dude get it welded! Having a bolt on tip is weak, the fasteners are usuall bulky and noticable. If you look around, you will easily be able to have one welded on for $50.
 
You cant even see the bolts... I cut about 4" off off the tail pipe before putting it on, if not it will come right through.
 
exhaust tip

i still have the Valor exhaust tip that was a dealer option from my 4runner sitting in my garage after i installed the borla exhaust kit. i have no use for it and if you want it, send me a pm.
 
I picked it up at the local autoparts store. Was not very expensive and appears to be a very similar tip sold by the dealership where I purchased the T4R.

It says 3 R Racing on the tip, and as I do an image search, there must be quite a few of them out there.

Good luck.
 
If you have the V8, cut the resinator off. Very sweet sound and not loud at all. Either add a straight piece from the tip to the point that used to be the resinator or just go straight stainless all the way.
 
You must log in or register to reply here.

Similar threads

M
My damaged 4runner dilemma
Replies
3
Views
3K
Monty87ls
M
F
SR5 V6 2WD upstream O2 sensor replacement tips
Replies
1
Views
35K
Cezar
C
H
Pulling to the left/wobble @ 40-50mph / New Lower Control Arms, align cams, CV Axle.
Replies
3
Views
3K
Parks Junkie
P
SPC4Runnergirl
Positive Battery Post/Terminal Question
Replies
3
Views
2K
MikeinNH67
MikeinNH67
W
Master won't unlock doors - evidence of previous aftermarket alarm
Replies
1
Views
6K
whyzee125
W

Members online

Total: 453 (members: 1, guests: 452)

Forum statistics

Threads
278,316
Messages
3,554,105
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top