Still having Transfer Case issues

[TNFISHRMAN]

I have tried to get the proper transfer case from a used parts company called LKQ. I have yet to my knowledge received the right one. I have a 2004 4runner SR5 V-8 which is all wheel drive. They have sent me two transfer cases out of two different V-6 donor vehicles. Neither Transfer case will lock into the AWD position the V-8 is standard with. They will switch from High to Low range but the front drive line never will engage. I have checked my front differential and it is in good working order. But the front output shaft of the transfer case will not engage to give me AWD.

I have looked at the Toyota part numbers and there are two different part numbers.The V-8 AWD shows a part# 36100-6D401 The V-6 part number shows a part# 36100-3D510. Does any one know how to tell the difference from the outside of the transfer case which one is which? Also, is there any where I can purchase a rebuild manual and just rebuild my original transfer case that broke? Any help is appreciated.

 

[TNFISHRMAN]

So nobody had tried to rebuild their transfer case? I assume that there is also no way to tell the part number of the actual transfer case other than what donor vehicle it came from.

 

[rdruss]

Apparently not, on both counts. The V8 t-case has a center differential that allows AWD, it's internal so not obvious from outside. What happened with your t-case? Why are you needing to rebuild/replace?

 

[TNFISHRMAN]

Apparently not, on both counts. The V8 t-case has a center differential that allows AWD, it's internal so not obvious from outside. What happened with your t-case? Why are you needing to rebuild/replace?

rdruss, read my other reply where I answered you. I gave the details there.

 

[Auditechnician]

http://http://car-part.com/mobile/index.htm

Try car-part.com

Will get you the part you need from multiple sources