Toytec Superflex Coil Question

[TNRunner99]

Wanting to see if anyone is running the Toytec Superflex coil with the stock LC shocks and if they will work. I bought the shocks planning on running them with my 8 wraps but I'm worried the 8s are too much of a lift. ugamurph got 4.5 inches out of the same springs I have (purple/green/white and double purple/light blue/white). I really don't want anything over 4", issues fitting in the garage plus crazy rake. I'm at stock weight now and 3.75" is fine because I have 3" in the front. I'm planning on a CBI with swingout in the near future. Anyone know the final measurements after a setup like this. Any help is greatly appreciated. Thanks

 

[gotopless]

I have the superflex coils and it looks great with 3" in the front, just the right amount of rake IMO. I've loaded a lot of weight in the back and it barely sank. I'll be putting my 12x6 covered trailer on her soon and I'll take pics of how much it sinks.

 

[TNRunner99]

I have the superflex coils and it looks great with 3" in the front, just the right amount of rake IMO.

Thanks for the reply. I know a CBI is somewhere over 200lbs thats why I was curious about how it would sit afterwards.

Anyone know about the shocks? I have them sitting in my garage and really want to be able to use them.

 

[sn0wrunner]

Thanks for the reply. I know a CBI is somewhere over 200lbs thats why I was curious about how it would sit afterwards.

Anyone know about the shocks? I have them sitting in my garage and really want to be able to use them.

You should be fine with those shocks. With the 200 lbs the Superflex coils will still have you sitting just over 3" of lift.

 

[TNRunner99]

You should be fine with those shocks. With the 200 lbs the Superflex coils will still have you sitting just over 3" of lift.

Ok good I was worried about how much they sag under weight.