Toytech or Radflo Lift Kit?

[ArcticEd]

I've done a LOT of reading on both this & the 120 forum regarding lifts. I decided to go with the Toytech "ultimate 3" lift kit" but when I went to their website they have a radflo kit on sale for just $20 more.

Any opinions on which of the two would be the best bang for the buck would be appreciated; I don't know enough about the specific differences between them.

The Radflo Kit

The Toytech Kit

If I could squeeze in a couple of other questions:
1) In the options for the Radflo kit they list the Bilstein 5100's, Icons, or Procomp 9000 rear shocks. What are opinions about each?

2) Both kits come with the diff drop kit - has anyone needed to install it with their lifts? I don't recall seeing that mentioned by most.

3) Would UCA's be a good idea with either kit? I know they're supposed to help with alignment but didn't know for sure if they are necessary with the 3/2 lift.

Thanks in advance
c

 

[Autbond]

If you are going to get the radflo kit you should purchase it from overland warehouse. As for the diff drop; it is not necessary to install it. UCA's would probably be a good idea if you have the money because you will eventually want them anyway.

 

[rook]

If you are going to get the radflo kit you should purchase it from overland warehouse. As for the diff drop; it is not necessary to install it. UCA's would probably be a good idea if you have the money because you will eventually want them anyway.

:iagree:

Overlands kit includes a better rear setup. The radflo rears are also rebuildable and are made of the same quality components as the front's.

 

[ArcticEd]

:iagree:

Overlands kit includes a better rear setup. The radflo rears are also rebuildable and are made of the same quality components as the front's.

The Overland website doesn't show application for the '10 4R; only the '03-'09 4R and '07-'10 FJ. I've heard (or interpreted) that the suspension in the FJ and 4R are the same for 2010 - does the kit fit the '10 4R?

 

[rook]

The Overland website doesn't show application for the '10 4R; only the '03-'09 4R and '07-'10 FJ. I've heard (or interpreted) that the suspension in the FJ and 4R are the same for 2010 - does the kit fit the '10 4R?

Yes, Overland Warehouse Suspension System for 5th Gen 4R - Toyota 120 Platforms Forum

If you have any questions about the Overland kit, you can contact them directly at [email protected] or call 1-818-453-5171
Facebook:
Overland Warehouse

Tell 'em I sent you eace: