Tundra 231mm Front Brake Swap

[Lignum]

I am thinking about doing this soon. Has any one here done this that can give any tips or tricks? Where did you get your parts, ect...

Is this write-up on par?


Gen 3 Toyota 4Runner: Tundra Brake Swap - Trucks 4x4 @ Off-Road.com

What are the options for the back?

 

[Mr. Leary]

Mr. Leary's 3rd gen 4runner - Page 5 - Expedition Portal Forum

Got my brakes from a JY in Arizona, shipped through a network of salvage parts houses.

The most difficult, or expensive part, in my case was getting rims that will fit the brakes... they are much larger than the stock 4Runner brakes.

This mod was easy.

 

[Mr. Leary]

What are the options for the back?

Don't worry about it. The options are not as good as what you have on there now...

 

[Lignum]

Mr. Leary's 3rd gen 4runner - Page 5 - Expedition Portal Forum

Got my brakes from a JY in Arizona, shipped through a network of salvage parts houses.

The most difficult, or expensive part, in my case was getting rims that will fit the brakes... they are much larger than the stock 4Runner brakes.

This mod was easy.

I have the 16" FJ cruiser TRD wheels, and I run 1.5" spacers, I don't think i should have any wheel interference. Thanks for the info.