Cool. What oil are your running?
I'm running Kendall (I know you weren't asking me) for no other reason than just to try something different, and have been since the factory oil. I'm at 80k now. I do oil changes after 8k based more on when I have time after that point as opposed to any specific mileage. It gets done usually around 9k. I should get a sample done just for kicks, but I'm not reallly worried about anything.
55k
The engine under a lot of heat soak would rattle on acceleration. I thought it was a heatshield for a while but then convinced myself it was bottom end. Tech heard it with me on test drive then replaced cam shafts to no avail.
He could replicate it by applying volts to the engine on the lift. I'm still unsure how that works.
Car ran perfect after the short block.
Cool. What oil are your running?
I've been running Mobil 1 AFE 0W20. On this last oil change, I switched to Amsoil Signature 0W20 (and on the 50k oil change I'll have them run TBN for me).
Here is my latest Blackstone report.
A couple of years ago I came across a thread on Bob is the oil guy where someone posted a virgin oil analysis of the Toyota 0w-20 synthetic oil. I will try to find that later.
I hope you do find the 2016 Toyota engine oil analysis installed in Japan on these runners ..
MY 2016 HAD SLUDGE IN THAT JAPANESE OIL ... NO sludge now after I dumped that oil @3K miles ..Mobil syn 0-20wt no problems and perhaps a couple of OZ of oil consumed @7K oil changes ..
very hard to read the dip stick the oil is so clear..
I'm almost positive Mobil makes the synthetic 0w-20 for Toyota.
I'm almost positive Mobil makes the synthetic 0w-20 for Toyota.
Thanks. That report is with the Mobile 1 correct? I'd be very interested in seeing your results when you test the Amsoil.