VIDEO: Install and Review of REDARC Tow-Pro Elite Integrated Brake Controller

[007Tacoma]

We just wrapped up the first of two videos regarding the REDARC Electronics Tow-Pro Elite which is an integrated proportional brake controller with a manual mode and override built in.

In the first video we detail the installation process we used to get this brake controller installed into our 2015 Trail Premium 4Runner. We use this mostly to control the brakes on our 2020 Highland Expedition Outfitters T3.5 Off Road Base Camp Trailer.

<iframe width="560" height="315" src="https://www.youtube.com/embed/t4aI8PbLGuU" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>



...that was back in April. ***and now for an UPDATE***


Now a little over a month later, we have about 700 miles of towing on and off road under our belt with this new brake controller and the second video in this series is out...

<iframe width="560" height="315" src="https://www.youtube.com/embed/VNWF18Wb9dQ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

 

[007Tacoma]

Updated the original post to include the second video showing the review of the REDARC Tow-Pro Elite and the comparison to our older Tekonsha Prodigy Brake Controller...

Cheers!
-Mark