What to Do?

[andyman32392]

So the other day I got my sport wheels powdercoated black

and here is how my 4runner currently sits:

Now what more could I do to make my baby look better. I would love to put on nice bumpers but its a 2wd V6 so I think that would be over kill. What would you do?

 

[SkylineGTRracer]

So far it looks badass. You could try a carr light bar or the bumpers. I don't think its overkill however I have heard with bigger, heavier bumpers you will need to renforce the suspension for the extra weight. Keep it up. Btw how hard was painting the headlights?

 

[andyman32392]

Thanks for the compliments. The headlights were not to hard although I did not follow the instructions on the thread floating around here I did it like this:
1) Take headlights of 4Runner.
2) Take out bulbs and everything else that you can on backside
3) Preheat oven to 325*
4) Turn off oven and place one headlight in for bout 10-12 minutes
5) Take headlight out and use your hands and a flat head to remove lenses from gray back-housing
6) Repeat for other headlight
7) Remove chrome middle from housing
8) Remove small lens from chrome piece
9) Using gloss black paint for plastics, paint piece with light coats and allow dry until satisfied
10) Once dry put the small lens back on the painted piece and put back into housing
11) Push big lens back into housing and repeat steps 3-4
12) Make sure lens is flush and tight with housing and put everything back together.

Over all it takes about 5-6 hours if you do it right.

 

[Net4n6]

You should paint the center caps black too. They look out of place with silver color.

 

[andyman32392]

You should paint the center caps black too. They look out of place with silver color.

Well I can't make up my mind because I got some people who say paint them and some people who say leave them silver and it is making it very hard to decide.

 

[berettashot117]

ya im gonna do the same same headlight mod when i get back. maybe i can get you and charles to help me