Wheel fitment?

[n2o302]

Just curious and I know they will fit but I was just double checking, will a set of 17" sequoia rims fit my 95 4runner with 4wd, I don't know if the sequoia is a 4wd or 2wd does it matter, I know that it should bolt in cause it's a six lug but I was wondering about the front hubs?

 

[gotmud?13]

the size of the rim has no bearing on wether or not it can fit. you could run 14 inch rims, with a 29 inch tire, or 20 inch rims with a 29 inch tire. the diameter of the tire is what will matter, not the size of the rim. if you want to look all "blinged" out, then go for a larger rim, and a low profile tire. but remember, the larger the rim, the more expensive the tire will be

 

[Alabama4Runner]

the size of the rim has no bearing on wether or not it can fit. you could run 14 inch rims, with a 29 inch tire, or 20 inch rims with a 29 inch tire. the diameter of the tire is what will matter, not the size of the rim. if you want to look all "blinged" out, then go for a larger rim, and a low profile tire. but remember, the larger the rim, the more expensive the tire will be

That's not strictly correct. Rim diameter and backspacing will affect whether or not a rim will fit on a particular vehicle. For example, you cannot run 15" rims (with the same backspacing as the factory 16" rims) on an FZJ80 because they won't clear the brake calipers.

Unfortunately, I don't know the answer to the original question but I didn't want him to think that he could put anything on that has a 6 lug Toyota pattern.

 

[gotmud?13]

very good point. i was meaning in a very general sense, but you are right, i should have mentioned diameter and backspacing.

 

[9T4Runner]

they might fit but the only real way to find out is just to try putting them on. I bought some rims that fit a Tundra and had the same lug pattern as mine but the hubs on my truck were too big and the rims wouldn't fit. hope this helps some

 

[MT4runner]

defiantly check the front hubs on the sequoia rims...same bolt pattern wont always work. my uncle had a set of really nice 17" american racings rims with BF m/t's on them and they didnt fit my 4runner. they were on his 95 tahoe. 4runners have big A$$ front hubs (comparing to other 6on5.5 style rims)

 

[n2o302]

That's what I was wondering if the hub is the same!

 

[gotmud?13]

worst comes to worst, you can take a grinder and grind out a space big enough for the hub to fit. i also treid putting my dads old jimmy 16" rims running on 33's on my runner. bolt pattern was identical, but my runners hub wazs WAY to big. i was going to just bust out a grinder or plasma cutter, but i dont think the pa would have been to pleasd

 

[MT4runner]

wonder if you could use a CNC machine and mill it out to the right size??? im sure a machining shop would do that.