Wheel Measurement Question

[CJ3Flyr]

EDIT: This should be correct now...:

Ok wheel gurus, very basic question regarding terminology. For some reason I have never been able to keep this straight.

If you have a 7

 

[Falls]

The following is what I read on the internet, the same place I read that Elvis voted for Uneek & Falls for Pres/V.P. so I can

 

[techno]

If a 7

 

[BlairB]

Whoa, Chris not knowing something

 

[CJ3Flyr]

Whoa, Chris not knowing something

:lmao:

I've read more and the guys at T120 set me straight. I've edited the 1st post to be accurate

:cheers:

 

[J.A.]

Hi Chris, the spidertrax spacers measure 1.25" or 31.75mm therefore if the 4th gen wheel is 30mm offset then the statement "4th gen T4R wheels w/Spidertrax = approx. 11.0 offset" cannot be true can it? Did you mean to write 1.0mm offset or does it have to do with 1/2 the width/centerline?

 

[CJ3Flyr]

Hi Chris, the spidertrax spacers measure 1.25" or 31.75mm therefore if the 4th gen wheel is 30mm offset then the statement "4th gen T4R wheels w/Spidertrax = approx. 11.0 offset" cannot be true can it? Did you mean to write 1.0mm offset or does it have to do with 1/2 the width/centerline?

Uhhh, I screwed up. I was thinking 1.5 not 1.25. And maybe I don't understand the Spidertrax. Are the 1.25's 1.25" total or each for a total of 2.5"?

EDIT: I think I got it now... They are 1.25" total, .625" each.

 

[J.A.]

Each spidertrax measure 1.25" in width, 2.50" total trac width added.

 

[CJ3Flyr]

Each spidertrax measure 1.25" in width, 2.50" total trac width added.

:lmao: Hmmmmm. I quickly skimmed this goof ball website and found this quote, "The additional tread/trac width (62.0" factory width, 63.25" trac width with spacers) would be a side benefit as well, offsetting the lift's additional vertical height and providing more stable handling." I should have read farther.
:bash: 63.25" should read 64.50"?

I'll get it:biggrin2: Thank-you for walking me through this. I think I've got it. This is a great resource: https://www.rsracing.com/tech-wheel.html

:cheers:

 

[J.A.]

:lmao: Hmmmmm. I quickly skimmed this goof ball website and found this quote, "The additional tread/trac width (62.0" factory width, 63.25" trac width with spacers) would be a side benefit as well, offsetting the lift's additional vertical height and providing more stable handling." I should have read farther.
:bash: 63.25" should read 64.50"?
[/url]

:cheers:

Sounds familiar...will have to get said goof to change it Thx.

 

[J.A.]

So is this now true?

4th gen T4R wheels w/Spidertrax 1.25" = approx. -1.75mm effective offset

 

[CJ3Flyr]

So is this now true?

4th gen T4R wheels w/Spidertrax 1.25" = approx. -1.75mm effective offset

Agreed... Thanks!