Why didn't I do this before?

El Jefe

New member
Well I had to replace the tires on my 4Runner and the local dealer informed me that the next size larger tire was actually cheaper than the 265's that came on the truck. Gotta admit I like it. After seeing how good she looked I went to a local place and had the front windows tinted (which if you are in the Tallahassee area the place to go is "Super Daves" he did a great job I think :gun6: )to Complete the look. My Bull bar and lights arrive next week so I will be having some fun with that too. The before and after shots are going to be pretty cool. want to complete the changes before I post the before and afters.

Whatcha think? Good job on the tint match? Tires look good too I think. :wink2:

Andy
 

Attachments

  • IMG_4507 [640x480].JPG
    IMG_4507 [640x480].JPG
    95.9 KB · Views: 1,702
  • IMG_4508 [640x480].JPG
    IMG_4508 [640x480].JPG
    90.6 KB · Views: 1,701
  • IMG_4509 [640x480].JPG
    IMG_4509 [640x480].JPG
    92.6 KB · Views: 1,701
Register to hide this ad
come on Senior. What size did you go with. inquiring minds want to know. stop gun decking and fill us in.
 
Does that tire even come in 275?
Good call Clemson...according to tire rack only one model of the Dueler A/T from Bridgestone comes in a 275, but's that on a 20 wheel and not with raised white letters. Looks like he got a Revo in 285?
 
Good call Clemson...according to tire rack only one model of the Dueler A/T from Bridgestone comes in a 275, but's that on a 20 wheel and not with raised white letters. Looks like he got a Revo in 285?

It's a Dueler A/T RHS not a Revo.. Must be 265/70R17

What kind of hitch step is that?
 
Last edited:
It's a Dueler A/T RHS not a Revo.. Must be 265/70R17

What kind of hitch step is that?

The hitch is a Go Rhino dominator hitch.

Wow Sorry guys, I was out with the family the whole day..... Gaterose called it on the tires and SkylineGTRacer named that hitch.....There are two versions of that hitch I preferred the Dominator D-360B. bought it for $91 dollars and free shipping from Amazon.com http://www.amazon.com/Go-Rhino-D360B-Dominator-Black/dp/B0012WKCR6 I added some lower back up lights as well.
I need to put down all of the mods I have done to her, Mostly LEDs, Rear light mod, Daytime running lights mod, Added the K&N, Blacked out headlights etc

I love this 4Runner! Good call guys! Can't wait to get the bullbar and Lights on...
 
Last edited:
Nice job!....and nice HitchStep...just like mine....:thumb3:
 

Attachments

  • stickerspty.jpg
    stickerspty.jpg
    45.9 KB · Views: 1,512
come on Senior. What size did you go with. inquiring minds want to know. stop gun decking and fill us in.

Gundecking? Everybody knows the Chief is never late, and he would never gundeck......tighten up sailor:keyboard: :)

JAC Love the look of your truck....

Andy
 
They look great Chief. Any rubbing there on the front edge? It looks like a tight fit, but it looks like that's the way it should have been from the get go. Keep us updated. I'm looking to lift and go with a bigger tire, but if the lift doesn't work out right away then I may have to get the bigger tires sooner as mine are about ready to go. The truck only has 33,000 miles on it, but those factory tires they put on were junk and I don't think the previous owner rotated them!
 
They look great Chief. Any rubbing there on the front edge? It looks like a tight fit, but it looks like that's the way it should have been from the get go. Keep us updated. I'm looking to lift and go with a bigger tire, but if the lift doesn't work out right away then I may have to get the bigger tires sooner as mine are about ready to go. The truck only has 33,000 miles on it, but those factory tires they put on were junk and I don't think the previous owner rotated them!

Thanks For that, I am expecting the Bull bar and the lights any day now so the will be the next improvement. Then the 3/2 toytech lift/leveling kit. I have no rubbing ordinarily, only when I am in a hard over turn and even then it isn't much. A little noise is about all again it is next to nothing. it is rubbing in the plastic splash guard in the front.
These tires are a full inch larger than the factory tires. and I think it looks great.

Andy
 
Thanks for the compliments.. May I ask what bull bar and lights are u getting?..

Sure, I was torn and cash is at a premium so I shopped around. I like the look of this one:

123_2_.jpg

Ionic Predator Black Bull Bar | Free Shipping on Ionic Predator Black Bull Bar


And I purchased a pair of KC Hilites (Driving lights) to go with it. He price matched the Amazon.com price of 163.00 and did not charge me any shipping. for either.

70.jpg

KC Hilites Slimlite Driving lights - 100W KC Halogen Bulb - 6" KC Slimlite Housing - Free Shipping on KC Hilites

I guess we will see how it all turns out.

I almost bought the blacked out headlights like you have with the halo or angel eyes but opted for these instead:
41Emaw39mZL.jpg
 
I almost bought the blacked out headlights like you have with the halo or angel eyes but opted for these instead:
41Emaw39mZL.jpg

You know you can take your stock headlights apart and paint them exactly like that VERY easily? It's very easy because the reflector separates from the chrome parts that are black on the ones you bought and A LOT cheaper

How to black out headlights

My headlights

I really like that bull bar, almost bought one myself.. I'm anxious to see how it looks on your 4runner
 
Last edited:
You know you can take your stock headlights apart and paint them exactly like that VERY easily? It's very easy because the reflector separates from the chrome parts that are black on the ones you bought and A LOT cheaper

How to black out headlights

My headlights

I really like that bull bar, almost bought one myself.. I'm anxious to see how it looks on your 4runner

Gaterose, I WAS going to do just this when I noticed that my original headlights had some micro cracks in the lenses so that was out. I really like the look though and I will post the pics when I have them.

That Bull bar reminds me of the Hunter Bull bar (that I can no longer find) If it comes out as good as I am hoping it should look pretty sweet. Andy:thanks:
Andy
 

Members online

Forum statistics

Threads
278,306
Messages
3,554,045
Members
248,016
Latest member
Advally Service

Trending content

Back
Top