Will cloth seats from any 3rd gen bolt into a 97 limited?

[Supermoney]

I want to remove these leather seats from a 4Runner and replace with with cloth seats, can you guys tell me if any cloth seats from any 97-02 4Runner will bolt in fine?

Thanks.

 

[Parker1938]

Hopefully this helps you out. I replaced the driver bottom and back cushions in my 02 with the passenger bottom and back cushions from a 98 and it fit perfect. I actually bought the entire front two seats, frame and all, from the 98 from a junk yard for real cheap just to make sure it all would fit and for the most part they were exactly the same as my frame and cushions. The passenger cushions worked just fine inside the driver cloth seat. This was going from cloth to cloth so not sure if there are any differences between leather and cloth.

 

[Supermoney]

Hopefully this helps you out. I replaced the driver bottom and back cushions in my 02 with the passenger bottom and back cushions from a 98 and it fit perfect. I actually bought the entire front two seats, frame and all, from the 98 from a junk yard for real cheap just to make sure it all would fit and for the most part they were exactly the same as my frame and cushions. The passenger cushions worked just fine inside the driver cloth seat. This was going from cloth to cloth so not sure if there are any differences between leather and cloth.

Hey thanks, that is a good sign but yes I am wondering if swapping from leather to cloth will pose any additional issues.

 

[white_n_slow]

I have never swapped them out, but I'm 95% positive all the bolts should line up. FWIW, I had a '97 SR5 with factory leather seats.