Will rear Tacoma bilstein 5100, fit on 4th gen?

[mrwinkle13]

So I found some billies 5100 for the rear at a good price only thing is they are off a 2014 Tacoma off road. My question is will they work with my 4runner? I know the stock billies can work with a bushing swap, does this hold true for the rear 5100's?

 

[kevinpt]

So I found some billies 5100 for the rear at a good price only thing is they are off a 2014 Tacoma off road. My question is will they work with my 4runner? I know the stock billies can work with a bushing swap, does this hold true for the rear 5100's?

would they fit? likely.
are they the best option? they will likely not be the same feel as 4runner rears seeing as shocks are made to work with one vehicle. they might fit but might not feel the same

 

[RaceTRaCk]

yes it will fit. I ran the long travel tacoma 5100s before using energy suspension bushings. Only thing was the shocks were too soft for the allpro coils.

 

[mrwinkle13]

I'm going with toytec superflex in rear, do you think the shocks will be to soft for those?

 

[AARONR]

They will work with Zero lift in the rear. If you lift it you need a longer shock.

Happy Wheeling!