Windshield squirters, LOW pressure.

[gfluff]

Easy to remove tank and all. Four bolts two hoses. The filler neck just pullout. Check for chunks the the reservoir. Clean it out along with lines. I think the pump also has a small screen on it to keep the big stuff out.

Is there supposed to be a seal or a gasket between the neck and reservoir? I was refilling mine yesterday for the first time (only had the truck a few months) and the fluid came pouring out of the spot where the 2 parts meet..

 

[V8Man]

Yes it's a rubber ring that goes around the lip in the hole in the tank. The spout fill funnel goes inside it. The spout is held in place with a bolt. I suppose the rubber could be inside your tank. Even if it is in place the fit is not real tight.

 

[Stuck CAPS]

FIXED IT! I opened the hood and it squirted out with full pressure so I unclipped teh hose at teh hinge and gave it a little slack and it works like new. I wish I would have tried that before I bought the squirters, now I feel dumb.

Pictures? Mine squirt with low pressure sometimes, and normally at others. It seems to happen when I use it for the first time in a few days, so I assume it's clogging nozzles, but I could also see it being something similar to what you had to do.

Edit: Cool. 1000 posts, yo.

 

[c_mack9]

I didn't take any pics, but if you open your hood you'll see the tubing on the passenger side. Just unhook it and give it a little slack.