XD Crank or XD Revolver

[fastball25]

I'm looking for a 17" matte black wheel set for a 2001 Sport in Silver. I'm liking the XD Crank and Revolvers (like the Monsters but they only come in 18"). Has anyone used either of these wheels? I'm afraid the backspace on the Cranks might be too much 5". I plan on adding the toytec ultimate lift to my new ride to fit these wheels and some new rubber. Thanks for any thoughts and experiences!

 

[brian2sun]

5" BS is too much unless you use some wheel spacers. 285s usually rub on the UCAs with stock backspacing (which is 4.6"). So 5" would pull the tires in almost a half inch closer to the UCAs. The spacers that would work for those wheels would be the 1" Allpros or 1.25" Spidertrax.

 

[fastball25]

The revolvers have 4.5" backspacing while the cranks are 5".

 

[ReconCmdr]

I have the 18" Revolvers on mine with a Toytec Ultimate Lift and LR UCA's with BFG 275/70r18 and I love the the Revolvers and have not had any issues with rubbing the UCA's. However that could be the new UCA's.

 

[fastball25]

I have the 18" Revolvers on mine with a Toytec Ultimate Lift and LR UCA's with BFG 275/70r18 and I love the the Revolvers and have not had any issues with rubbing the UCA's. However that could be the new UCA's.

Do you have any pics of your setup? Are you running spacers?

 

[ReconCmdr]

I will try to post some pics. Need to download them to my computer. No spacers I have thought about them for a wider stance but have not pulled the trigger yet. There are other mods that have priority.

 

[DannyLlama]

I will try to post some pics. Need to download them to my computer. No spacers I have thought about them for a wider stance but have not pulled the trigger yet. There are other mods that have priority.

:worthless

 

[wootman]

Revolvers on my 99...