The data sheet for my alternator. I know next to nothing about electrics so hopefully this is good.

The data sheet for my alternator. I know next to nothing about electrics so hopefully this is good.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
View of the negative battery terminal with the factory ground and battery negative to chassis wires bolted on either side. I also removed the paint wh

View of the negative battery terminal with the factory ground and battery negative to chassis wires bolted on either side. I also removed the paint wh

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
View of the positive battery terminal with the factory wires bolted in on either side.

View of the positive battery terminal with the factory wires bolted in on either side.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Topside view of the new battery terminals. The negative battery terminal has two 1/0ga. wire lugs on it; that number will go down to one once I get a

Topside view of the new battery terminals. The negative battery terminal has two 1/0ga. wire lugs on it; that number will go down to one once I get a

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
On the driver's side below the valve cover and header, the positive connection for the alternator is barely visible.

On the driver's side below the valve cover and header, the positive connection for the alternator is barely visible.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Closeup of the alternator, engine block ground (goes directly to battery negative terminal), and the power steering pump belt used in place of the fac

Closeup of the alternator, engine block ground (goes directly to battery negative terminal), and the power steering pump belt used in place of the fac

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Alternator is all in! I did have to remove all the drive belts, so the job took about twice as long. But worth it for sure.

Alternator is all in! I did have to remove all the drive belts, so the job took about twice as long. But worth it for sure.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
The copper wire lugs after soldering and hammer crimping them, but before heat shrink. The hammer crimper was easy to use and creates very strong conn

The copper wire lugs after soldering and hammer crimping them, but before heat shrink. The hammer crimper was easy to use and creates very strong conn

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Sweet shot of the back of the alternator. I was able to use the "bend and drill" technique in Doc's CS144 thread to reuse the stock connector and plas

Sweet shot of the back of the alternator. I was able to use the "bend and drill" technique in Doc's CS144 thread to reuse the stock connector and plas

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
The "original" (not OEM, PO put this on here unfortunately) ground wire. The little tiny wire from the negative terminal to the chassis was also almos

The "original" (not OEM, PO put this on here unfortunately) ground wire. The little tiny wire from the negative terminal to the chassis was also almos

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
The other two wires that I connected to the positive battery terminal. The larger ring terminal is the original power wire, and the smaller 10-gauge w

The other two wires that I connected to the positive battery terminal. The larger ring terminal is the original power wire, and the smaller 10-gauge w

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
My first complete 1/0 cable is made. For the copper lugs, I melted solder in each of the lugs (filling the lug up with small-ish pieces caused the mel

My first complete 1/0 cable is made. For the copper lugs, I melted solder in each of the lugs (filling the lug up with small-ish pieces caused the mel

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Size comparison from the back of the CS144 and the OEM Denso.

Size comparison from the back of the CS144 and the OEM Denso.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Size comparison from the top of the CS144 and the OEM Denso.

Size comparison from the top of the CS144 and the OEM Denso.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Size comparison between the CS144 and the original Denso.

Size comparison between the CS144 and the original Denso.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Received the CS144 and testing the copper lugs on the alternator post.

Received the CS144 and testing the copper lugs on the alternator post.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Acquiring parts for the CS144 upgrade. 1/0ga. OFC wire, pure copper lugs, and to top it all off, more cheapo battery terminals from Walmart

Acquiring parts for the CS144 upgrade. 1/0ga. OFC wire, pure copper lugs, and to top it all off, more cheapo battery terminals from Walmart

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Another pic of the metal collar that surrounded the old bushing. I cut straight through it with the hacksaw to make a relief and then bent it away fro

Another pic of the metal collar that surrounded the old bushing. I cut straight through it with the hacksaw to make a relief and then bent it away fro

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
I don't own a press. After much effort, I was finally able to remove the old bushing. I used a c-clamp to press out the inner metal ring, a drill pres

I don't own a press. After much effort, I was finally able to remove the old bushing. I used a c-clamp to press out the inner metal ring, a drill pres

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
There were some unsealed areas surrounding the light bar mounts and where the cable was drilled through the roof. Sealed using Permatex silicone.

There were some unsealed areas surrounding the light bar mounts and where the cable was drilled through the roof. Sealed using Permatex silicone.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
I didn't think about this part until the tank was back in. Much of the dust that was in the cabin was coming in through this not-at-all sealed hole. I

I didn't think about this part until the tank was back in. Much of the dust that was in the cabin was coming in through this not-at-all sealed hole. I

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
The old bushing versus the new bushing. I feel the need to specify that the old one is on the left and the new one is on the right, since the differen

The old bushing versus the new bushing. I feel the need to specify that the old one is on the left and the new one is on the right, since the differen

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Driver's side coilover removed to replace the lower bushing.

Driver's side coilover removed to replace the lower bushing.

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
The new fuel pump assembly with a brand-new float too :D

The new fuel pump assembly with a brand-new float too :D

  • Media owner Toast
  • Date added Aug 1, 2021
  • Reaction score 0
  • Comments 0
Toast

'97 4x4 Progress

  • Items 44
  • Album owner Toast
  • Date created
Few old pics
Click to expand...
There are no comments to display.

Album information

Album owner
Toast
Date created
Item count
44
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Toast

Toast

Media items
44
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Members online

Total: 896 (members: 5, guests: 891)

Forum statistics

Threads
278,312
Messages
3,554,089
Members
248,016
Latest member
Advally Service

Share this page

Back
Top