Recent content by 4 RunnerBoxer

If I measured right , I’m at right close to 24.5” on both left and right rear Around both 22.5” front passenger Side and just about right at 22.25” on front drivers side . Still a bit of lean even with the spacer installed. Hard for me to be real accurate with my older eyes and lean...

So have 302 front springs and 325 rear springs installed. Listed as 2.5” lift on both. Have noticed now that has been several months the front seems to have settled a bit, the rear not so much. I only very rarely load down the back. Seems to my eye I have a little more rake than I’d...

Any new updates from those running the Ironman pro foam cell lift kit and/or their UCAS? Did those of you who installed the 2.5” front/2” rear still maintain some factory rake?

So anyone else running OME 884 front, 895 rear set up?

So a time now been running Iron Man Foam cell pro lift kit for awhile? Durability, comfort? I know they recently had some issues with their UCA ball joints, had a recall, replaced them all. I know their UCAs are made in China. Sometimes though made in China can be good quality if properly...

So looking at getting a set of Fifteen52’s black Analog wheels. Probably putting 2” lift kit and 285s on soon. So for the 4runner bolt pattern they offer two options. 17x8” 25mm offset 17x8.5” 0mm offset which one think is better? Pros and cons one vs the other size? Thank you.

Ha! Had my 4runner 7 months now and just realizing their is ambient light coming from the roof center console, and also you can dim the interior lights. Also finding out a pen holder in the center console lid.

My dilemma as well. Like the Dobinson IMS but still debating what set up to get. 302 front, 505 rear? Or 302 front, 325 rear. I like to keep some factory rake. But of course don’t want to increase the rake. And definitely do not want the reverse rake, which many “leveled “ 4Runners seem...

So seems come across many companies selling the old man emu kits with the lightest rear spring option being 889. And many installing this (and say has stiff ride). But when look at OME application catalog, the 889 is not even listed as an option and 895 is suggested for the rear. When...

Why I’m specifically looking for feedback from those running the FN six shooter rims. Thank you

Anyone else running FN six shooters with 285/70r17? (Looking at Toyo of at3 or Firestone destination at tires). Looking at this set up, along with old man emu 2.5” lift. Wondering if had, or how much, rubbing? Slight fender trim? BMC needed? Like the light weight of the flow formed six...

Anyone use the lighter valved old man emu shocks with their old man emu kit?

What set ups are you considering? What other set ups did you test drive with you liked? My covers is the high spring rate, especially the front. Couple hundred pounds more than say old man emu. The answer I got from Iron Man was it did not matter of had higher spring rate, cause they are...

Yes. I know that now. My question is now that I’ve sprayed it with corrosion free (similar to fluid film) and the Zeibart undercoating parts have combined with the CF oily substance to create a black tacky tarry oily substance that is sticking, will that continue to provide good rust...

Ok. Made, I think, the mistake of having Zeibart undercoating. Please don’t lecture me on my foolishness. ; ). Had Zeibart sound deadening undercoating 20 years ago, 100,000 miles, on my Tacoma and still was holding up. So Thought ok, just do ziebart undercoating for protection (just did...