Recent content by akbass907

  1. akbass907

    1996 suspension questions?

    I am buying a Subaru sti for daily driving, that's why I'm doing such big changes to the runner. I off-road every weekend in my runner and need larger lift and tires to keep up with the highly modified jeeps here in Alaska, and I know exactly what I'm getting myself into, I was just curious of...
  2. akbass907

    1996 suspension questions?

    Alright guys I have a 1996 auto 4runner. Currently have a bilstine/ome 3inch lift. Planning on supercharging it and adding a solid axle swap. But I don't want leaf sprung front, I want 3 or 4 link in front and longer travel rear. Are there any kits available for this model rig? I'm new to the...
  3. akbass907

    Acceleration problems? :(

    Fuel milage isn't bad, getting around 17-19mph, I have a 3 inch lift and 32s. But I have a used (in good condition) pump and filter at my house from my brothers taco
  4. akbass907

    Acceleration problems? :(

    I will look for the proper gauge when I get back to town. And I purchased the rig two years ago and it had 205k miles on it. So not sure how the previous maintinance looks. Although when I purchased it the rig the plugs and wires had never been changed.
  5. akbass907

    Acceleration problems? :(

    Any tips on how it should go about doing that?
  6. akbass907

    Acceleration problems? :(

    Alright guys, I need some help. I have been having a problem, under heavy acceleration I get a sputter from my rig, feels like a misfire, I hve a lack of power when sputtering is going on, and when I let off a little I get full power back. Happens in any gear, including off the line. And when...
  7. akbass907

    Taco front end conversion????

    i have a 96 and really want to do this. all depends on if i can find the parts for the right price. i believe ill be the only one in alaska :flipoff:
  8. akbass907

    AISIN Manual locking hubs

    I plan to do this to my runner soon so I'm sub'd
  9. akbass907

    intermittent rough idle

    I'm having a very similar problem, but it happens when I'm in any gear, rough idol, drop in rpms when at a stand still. Not sure what to look at, thinking MAF in my situation but not sure. Very depressing after throwing a grand into a newer tranny.
  10. akbass907

    Miles per tank?

    I have a 96 with 3inch lift and 32s auto tranny, usually getting 240-280 19-21mpg depending on temp and trips into town. My fathers 96 gets 23mpg religiously. And my fathers 98 with horible engine nock gets 28mpg. Both with 3inch lifts and 265/75/16s, and 5 speeds
  11. akbass907

    TRD 7th injector...??

    I'm not sure about the Trd 7th injector mod, but I know with the Trd 7th injector mod, but the urd 7th injector mod has some variance in Ecu-PCu connections. Also installing the 7th injector mod isn't "easy to install" it's very time consuming and intricate. And if you get one of the few PCUs...
  12. akbass907

    Rough idel when warm? Almost to the point of stalling

    How is it going everyone, back with another minor problem with my runner after getting the tranny fixed, now when I have been driving it a little and the engine is warm when I stop at a light the idel drops to about 400-600rpm and has low spots of 300 where it almost dies but it kicks the rpms...
  13. akbass907

    Bad vibration under heavy acceleration?

    I will pull my plugs and look, but they are only 17k miles old, and I'm sure it is engine or tranny due to being able to feel it. It is a brutal shake that happens when I'm on the gas, if I let off the gas and get back on it it will stop doing the shake. I will find a tunnel or something to try...
  14. akbass907

    Bad vibration under heavy acceleration?

    Alright I've got a question for you guys, I've been doing a lot of work on my runner recently, including getting a new tranny due to loosing second gear and overdrive, but before I got the tranny put in and now, after I got he newer one installed I get a very bad vibration when I'm in over drive...
  15. akbass907

    Way to get around no cat?

    By can't afford I mean I'm in Alaska and no aftermarket company ships up here so I have to go with ome, and all the junk yards are required to cut out the cats and recycle them so no luck there either. So untill I can afford a new ome cat I will be purchasing the urd sensor simulator.

Members online

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service
Back
Top