Recent content by Jb50

Can't beat oem!! Especially Toyota!!

Got a pic of truck with the 0 offset

I'm getting a used front drive shaft. And will Be replacing the u joints. I also replaced the transfer case. When it broke it cracked the case

It's a V8. It doesn't do anything when I press the lock button. Just light comes on. Also myVSC TRAC and VSC OFF lights are on. I can even push the runner while it's in park.

Just like the title says. I broke a u-joint( well previous owner did) so I took it off thinking I could just use the rear wheels and the front part of the transfer case spins but the rear don't. Am I missing something. Thanks for the help appreciate it.

I need a front driveshaft Anyone know what I can cross reference to? Or would anyone know where I can find one? Live Hawaii. Will pay for shipment so long price is right. Looking through the local junkyards coming up empty

this pic has the plastic power distribution When you open it up there's 2 screws that hold together a plastic piece that basically connects the pins from the connector to the bottom motor. I'm sure you could leave that off try it. If that area works fine you'll have to disassemble that whole...

Top half

These are pics of the lower section which needs to be disassembled to get to top section.

Thanks that's a huge help. I like some sidewall What about offset. I'd like it to be just past the fender say 3/4 to 1 1/4 out

I just installed my actuator. TC still installed in the T4R. Just dissected the entire actuator. Got step by step with pics. Let me know if anyone wants those posted. Also noticed the spring in the seal wasn't in the seal. Instead it was on the shafts itself. Had to reinstall spring into seal...

Could you post the pics? Or email it to me??

So what exactly is the process of removing the actuator? My universal broke cracking my transfer case. Ordered a used one online and it came without the actuator. But when I unbolt the three bolts holding the actuator on, it only goes back like an inch and a half. Don't wanna ruin it. I already...

2003 SR5 stock 17" wheels. Do I have to run 17s. Or can I run 16s. Mahalo

What's the offset. I want mine out a little. Also I live Hawaii. Is this possible? And what's the costs