Recent content by jfeg

I PMd you

Gone

Thanks! Everyone I find in the junkyard the tabs are already broke off

The 2000 Limited I bought is missing the door on air filter box in the engine compartment. I’ve tried local junkyards with no luck. Is there a place to buy just the door without buying the whole assembly? Or a recommended alternative that’s cheaper?

Thanks for the help! Took me 2 1/2 days but it’s got another rear end under it! Got lucky that it’s the same gear ratio. No lights on the dash unless I hit the RR Diff Locker button. So far it’s all good. Thank anyone would be interested in the old one for the elocker?

I’ve got most everything disconnected to remove the rear axle. The larger plug for the locker was easy enough. But I can’t seem to get the smaller one unplugged. What’s holding it on?

If it is different can I just regear the front?

To be honest I was really surprised it was that cheap! Man said it’s to whole assembly hub to hub. $100 for the rear end and $50 to drop it for me.

A local junkyard has a rear diff with the factory locker for $100 but it’s out of a ‘97. What are the chances it’s the same gear ratio?

we????

It’s the rear pumpkin cover that’s cracked.

I’ve tried 3 times to upload a pic but it says upload error! So I guess that means my rear diff isn’t leaking on my driveway? Or the guy at the shop that had it on the lift and pointing to the crack leaking fluid are incompetent?

New to the forum and already in a bind! I bought a 2000 Limited 4x4 a few days ago, cheap. (I know!!!!) Everything works, even the A/C and power antenna Drives great! Today I noticed a leak from the rear end. Found out it has a crack in the rear differential. Guy at the shop said take a wire...

When I bought my 03 the panel covering the subwoofer was cracked and pushed in. I'm sure this isn't the first one it's happened to. What have others out there done to help fix the issue? I thought about cutting out the section covering the sub and using a 2 piece 8" sub grill to cover the hole...

Appears that my left front turn signal socket has been replaced along the way. And it has a different type of bulb than the right. The sockets appear to be the same. Left bulb has a glass, actually plastic, blade type connector end with 4 exposed wires, two on each side. It just tapers to a...