Recent content by MIKEBO

Got one off flea bay, 50.00 shipped! Installed and working great! Thanks for your reply's! Mike :biggrin2:

The gears inside the rear window (tailgate) motor are toast. Looking at ebay the ones on there aren't the same part #. my question is, what motors fit. The part # on mine is 95710-89105 062100-3320 looking to try to save $$$$ Does the other window motor fit...

It looks like I'm working 60 hours this week, so I called a reliable mechanic and he said 450.00 to 500.00 using OEM parts. I hope that means for the flywheel to be turned. I need this done before the weekend. Thanks for your feedback and help. I will follow up with a update post. Thanks, Mike

1990 3.0 4Runner I guess it may be time to replace my clutch. I'm a fair mechanic and I'm thinking of doing myself. I have never done a clutch before. What do I need and what is the replacement parts manufacture do I use? Any good links? I searched some but thought I would ask for help? Thanks...

Fixed. Wires were bad.

1990 4runner 3.0 I took the mass air flow sensor with the intention of cleaning it. I found out that it does not have the two wires to clean as I hoped. After putting it together and back on the truck doesnt want to run. error 31 I cleaned the connectors took it apart again and same problem. The...

I'm going to start by cleaning the (Idle Air Control) on the throttle body.

Any sensors I need to look at ?

No. it idles fine until it warms up. I mean really warms up. Like after you drive it for awhile.

Last summer after the truck gets hot it wants to idle to low. It runs fine until it get hot then the idle will slow to 400 to 500 rpm's. Once cooled of the idle is fine till it gets hot again. The winter is a little better,takes longer to warm up, but same problem. The temp gauge is jumping...

Water Pump Done ! I replaced the water pump and thermostat. It wasnt to to bad, just time consuming. I also I'm glad I did it myself because the place (KP automotive) that did the timing belt a year ago should have replaced the water pump. They also left a couple of bolts loose and the timing...

Water Pump Done !! I replaced the water pump and thermostat. It wasnt to to bad, just time consuming. I also I'm glad I did it myself because the place (KP automotive) that did the timing belt a year ago should have replaced the water pump. They also left a couple of bolts loose and the timing...

Just got the tires and I'm not sure on the wheels, they were on when I bought it back in 2006 Uploaded with ImageShack.us

Water Pump The timing belt was done about a year ago by a mechanic ( should have replaced water pump ) Not willing to pay people to do a job I can do. I was wondering if the timing belt is good (should be) Can the water pump be done with out removing the crank pulley? Thanks for your offer I...

Water pump leakin and going to replace myself. (first time) I had a shop replace the timing belt about 20,000 ago and not willing to pay the big $$$ I've done a search and gotten some info. I was looking for advice on procedure. I do have a chiltons manual for what its worth. Any advice or links...