Recent content by The Jc2203

I used the Duralast from autozone and I'll check it with my amp unhooked

I have a 98 2wd sr5 4Runner and last week it would barley start for me so I replaced the starter everything was good, a couple days later my voltage dropped below 10 and it wouldn't start so I replaced the alternator today and thought I would be set but I'm still only getting 13 volts at idle...

So I have been running a 1200 watt kicker amp to my subs no problems for just about a year and I recently got a a 42" 240 watt light bar and installed it and no problems for a couple days. Now it seems my light bar has put me over the limit and killed my battery so I jumped it and charged it...

So I changed my guage cluster out with all new LEDs and it worked just fine, so I decided I was going to change my HVAC out also so today I pulled the bulbs and put new ones in and now neither the HVAC or mph/rpm will light up. My O/D blinkers seatbelt etc... will still light up I'm not sure...

I've been searching around for a fishing pole holder to put on my stock roof rack to transport my fishing poles with me bu, haven't had any luck :Cry: So i was thinking of coming up with an homemade one as anyone else done something similar? Tips are welcome!

I have the Kenwood KDC-BT555U but i was just discontinued the newer model of it is the Kenwood KDC-BT558U. For $149 at crutchfield with all the instal gear. Kenwood KDC-BT558U CD receiver at Crutchfield.com

I'm running 16x8 moto metal MO951 with 4.5" backspacing and a 0 offset.

Already checked those, I was planning on buying a grease gun and grease and greasing up the u-joints on the drive line other users have suggested that on other threads...

So when I get up to about 20 mph and apply the brake I hear a metal on metal noise until i get below 10 mph , I have a 1998 T4R sr5 with 133K replaced front rotors and rear wheel bearings so its not the brakes, and also repalced timming belt hoses fluids 3k ago and tranny mount about 500 miles...

Bump... Replaced tranny mount and nothing, i think it is my u joints on my drive line will have them looked at this week....

Bump... so i think that my tranny mount is shot, i can move it a few inches i will replace today see if it goes away

So I have a 1998 t4r 3.4 2wd Auto, and when I get up to about speed and start slowing down in between 15-11 mph i hear this metal on metal sounds like it is clanging back and forth also when I shift out of park to drive I hear another metal hitting metal sound, also the previous owner pulled the...

16x8 they will stick out more

Really happy with my bf goodrich all terrian tko :driving:

I totally understand Russ good ole California for you! You always have to think about your mod before you do it here!