Recent content by The4kbeast

I don't know if you ever got your answer, but the rear upper part of the skid plate on either side of the skid plate (part that is vertical) would have to be trimmed. Would actually be pretty easy to do.

How many of y'all would be interested in doing this again? Looking at setting up another big event on a Sat, camping at Blue Jay, then departing Sun am.

I'm working on planning a run. We're trying to get a large group with a every generation of 4Runner there. Stay tuned.

I'm in Orange County

Beefy Thanks, they are beefy. A 2.5" can holds about as much fluid as a 2.0" with an external reservoir. No external reservoir means I'm not sweating ripping it off. That said, I may get the upgrade when I get my first or second rebuild in the coming years. Ride Radflo used to run firmer...

For those of you that don't venture outside of the 3G section, I visited Radflo's manufacturing facility earlier this month in Fountain Valley, CA and took some pictures I thought I'd share. I posted it in the general suspension section since they sell across generations. Link...

I visited Radflo's manufacturing facility earlier this month in Fountain Valley, CA. Took some pictures when I picked up my new setup and thought I'd share. Here's a look at some of the work that goes into turning a bunch of tubing into shocks: The start of shock/coilover cases: A bypass...

Geez... If I were going to heckle, I would have given myself a hard time for calling a nut a bolt... but I guess your point is just as silly and accurate. Pick my battles, eh? I hadn't measured the nut up appropriately, but had snapped the picture so I'd remember what size it was for later...

Yessir. I'd actually gone wheeling a few times before I found it. Didn't recall hearing it. And my rig doesn't seem to have any unusual characteristics except a tired steering rack. Hmmm....

Im with you, 21 seems too large for a shock nut. Light racing includes a new bolt/nut/washers with their UCAs. I'm guessing that's what it is. I have to get boxes down and check my "leftovers" to do a count. That was my other thought. I poked around and couldn't find a thread for it on the...

I went to light racing upper control arms... maybe this is the old nut.

Get your mind out of the gutter. Took my skid plate off for an oilf change and found a 21 mm nut banging around. I laid on my back for a half an hour looking around for where it goes to no avail. For those of you fellow wrenchers -- off the top your head can you think of any places a 21...

Welcome to the Toyota community!

Note that the above pictures only show the cleat for sizing reference - I did not shave the cleats down because I borrowed the truck...

Q: Does OEM 2007-14 Tundra adj bed cleat fit in 3rd-gen 4Runner roof track? A: Yes, but... I measured it up because I was curious how much of the OEM stuff is compatible... so I figured I'd share the info. The second/third-gen Tindra has awesome (cast metal?) bed cleats available that hold...