Recent content by WhiteRubi

I always assumed it would work. I'll have to go track down the info that said it wouldn't to see why.

Turns out that write up is the TRL-M. From what i can see, no turn signals.

No, I'm not sure. I'll look on the Tundra forum. Seems I saw on the Taco forum it wouldn't work, but that was a couple weeks ago that I looked and perhaps i overlooked something.

Hey guys, I just ordered a Baja Designs RTL-S. The plan is to mount it rear facing on the Prinsu. I was curious to know if anybody has mounted this light and can help with the simplest wiring to have all the features work correctly (running lights, turns, reverse, and brake). It seems like...

hey guys, I've added an older iPad to the 4unner for maps and music. I'd like to add a bluetooth OBD-II reader and a decent app to see diagnostics live. Within a few months, I'll be adding a Magnusson and I'll be pulling a trailer some so I'd like tha bility to read trans temp and various other...

Hey guys, just recently ordered a SwitchPro 9100 and about the only solution i can find for mounting the control panel is SDHQs that mounts it left of the steering column. Has anybody mounted it in the open slot below the AC controls and below the USB/12v panel?

I ran across a good deal and started digging. I decided to bite the bullet. Ordered 255/75/17 BFG mud terrains and the Daystar 2.5/1.5 for $672 on Amazon. Couple of questions regarding this, Will I need an alignment after the spacers? I know I would with any other lift just not sure about...

Thanks for the info fellas. Then timing belt was done as was all recommended maintenance by previous owner. I just wanted to get this stuff lined out before I lift it. I don't drive much as I work from home but if I can gain a few mpg by a tune up, then I'll do it, especially knowing that...

2004 V8 AWD SR5 168,xxx miles. here are some issues: gas mileage is around 15 on interstate. not sure if this is normal @ 70-73mph when I accelerate quickly (mash the gas, and sometimes down shift) i have an odor in the cabin, sulfur/ammonia smell. I'm thinking improperly burned fuel. So...

Been digging around and really I've confused myself more. So another question, any reason to do the toytec 5100/eibach lift ($900) over wheelers offroad 5100s and OME 886/896 combo @ $650? I'd have to have the struts assembled but that's not a big deal. What else am I missing for the $250...

I guess I knew that, Preacher. I just wasn't thinking when I typed that response. LOL. So let me ask this, will just the body Mount chop be sufficient? I'll do the BL if necessary and really prefer to knock all of this out in one weekend. (Suspension, UCAs, chop and BL if needed)

Thanks for the responses. I've read a little on the Ebay UCAs. I understand the bolt needs to be upgraded and some have shipped with short bushing sleeves. I know I can get the bolts, but are the bushing sleeves readily available? Seems like several people here run the 285/70s. I'm okay...

Hey guys, starting to build the 4runner I just bought and have a few questions. First, its a 2004 SR5 V8. 165K miles, single owner with all services done at Toyota. Galactic Gray Second, a planned list: 5100 Toytec 3/2 lift extended brake lines Ebay Silver UCA (I hope this is right to help...

Is anybody running this tire size? I'm considering it with steel 16x7's and the Toytec Ultimate. Possibly a 1" BL if needed and SpiderTrax. I had my mind set on 285/75-16s (Mastercraft Courser MXT) but if I can get by without a BL and no major rubbing, I'd forgo the Mastercrafts for the...

Even with shipping, that'll work. Do you have 5 in good shape? I have a UPS account and can handle shipping if you can box them up, maybe in pairs or individually to save some shipping costs.