So, I'm about to hit 150,000 miles on my 1998 4Runner Limited. I wanted to know what type of maintenance I should do and what parts should I use.
I am planning on doing this so far:
-Timing belt & water pump and all the seals
I am getting a really good deal on the kit from Olympus auto parts $291 for everything, including tensioner and pullies and all the seals. My question is should i get this or go OEM?
-Lower ball joints (OEM), Inner and outer tie rods (Olympus Auto parts)
-All three drive belts (OEM)
-Transmission drain and fill
-Add a transmission cooler (Which one should I get?)
Stuff I've already done:
-Spark plugs, Wires, PCV valve, and fuel filter.
I am planning on doing this so far:
-Timing belt & water pump and all the seals
I am getting a really good deal on the kit from Olympus auto parts $291 for everything, including tensioner and pullies and all the seals. My question is should i get this or go OEM?
-Lower ball joints (OEM), Inner and outer tie rods (Olympus Auto parts)
-All three drive belts (OEM)
-Transmission drain and fill
-Add a transmission cooler (Which one should I get?)
Stuff I've already done:
-Spark plugs, Wires, PCV valve, and fuel filter.