jaredbishop
New member
I'm new to the forum and this is my first T4R
Purchased 1/19/10
Paid $500.
Miles-215k
1990 Stick 4WD
I love it but here are is the short list of engine problems:
Leaks Power Steering Fluid
Leaks Engine Oil
It did not pass emissions, A tech who owns one said he could tell is miss firing, told me to get Denso spark plugs use oem wires and a Denso rotor & cap. I'v pulled the old spark plugs and have new Denso to put in. No wires or rotor or cap yet.
I did a compression check (and a wet test for bad ones)here is what it come up with:
Numbered in order if looking at engine from the front of the truck
--------------130 psi / 75 psi (100 psi wet)<br>
--------------140 psi / 135 psi<br>
95 psi (140 psi wet) / 125 psi<br>
So my big question is what do I do next? What has to be pulled off, checked, fixed, resurfaced, replaced?
Purchased 1/19/10
Paid $500.
Miles-215k
1990 Stick 4WD
I love it but here are is the short list of engine problems:
Leaks Power Steering Fluid
Leaks Engine Oil
It did not pass emissions, A tech who owns one said he could tell is miss firing, told me to get Denso spark plugs use oem wires and a Denso rotor & cap. I'v pulled the old spark plugs and have new Denso to put in. No wires or rotor or cap yet.
I did a compression check (and a wet test for bad ones)here is what it come up with:
Numbered in order if looking at engine from the front of the truck
--------------130 psi / 75 psi (100 psi wet)<br>
--------------140 psi / 135 psi<br>
95 psi (140 psi wet) / 125 psi<br>
So my big question is what do I do next? What has to be pulled off, checked, fixed, resurfaced, replaced?
Last edited: