TRDORP4Runner
New member
Colorado, Dealer originally called me mid August, I believe the car was at port since then, it was held up for some reason.
2020 TRD Pro Updates - Army Green & Push Button Start
- Thread starter Ryan1975
- Start date
Colorado, Dealer originally called me mid August, I believe the car was at port since then, it was held up for some reason.
Yeah mine was at the port since mid August, got on the rail car today. Expected 9/30-10/2.
Sillylikeagoose
New member
Those of us with a 2020, what’s your thoughts on aftermarket bumper compatibility with TSS-P? I’m wondering where the front sensor (or “lunch box” as it has been affectionately described) is mounted and if a bull bar would clear it. I’m specifically interested in the [MENTION=131444]C4 Fabrication[/MENTION] lo pro bumper. The full height bull bar might clear the sensor, but what about the mounting points for the sensor? Is cutting of the OEM bumper still an option? Anyone with a 2020, please post close-up pictures of the sensor and how it’s mounted or where wires are routed, if you can easily see that. TIA!
[MENTION=431492]CLT_PRO[/MENTION] [MENTION=304954]TeamHeq[/MENTION] [MENTION=415757]guns.runner[/MENTION] [MENTION=425258]daniel805[/MENTION] [MENTION=426659]Sillylikeagoose[/MENTION]
I'll grab some pics tomorrow in the sun. But when I was out there looking at it to describe to the CTHome rep, I noticed that the "Chaplin Mustache" is tight up against that body colored strip in the grille. Does anyone know how it gains its information and if obscuring it at all will cause issues? Based off of the pictures of the bull bar, it looks like it would still cover the sensor a bit. I want a lo pro without the bar, but I don't know how much further out the lo pro sits past the valence and if the TTS unit looks straight down at the road or not.
Those of us with a 2020, what’s your thoughts on aftermarket bumper compatibility with TSS-P? I’m wondering where the front sensor (or “lunch box” as it has been affectionately described) is mounted and if a bull bar would clear it. I’m specifically interested in the [MENTION=131444]C4 Fabrication[/MENTION] lo pro bumper. The full height bull bar might clear the sensor, but what about the mounting points for the sensor? Is cutting of the OEM bumper still an option? Anyone with a 2020, please post close-up pictures of the sensor and how it’s mounted or where wires are routed, if you can easily see that. TIA!
[MENTION=431492]CLT_PRO[/MENTION] [MENTION=304954]TeamHeq[/MENTION] [MENTION=415757]guns.runner[/MENTION] [MENTION=425258]daniel805[/MENTION] [MENTION=426659]Sillylikeagoose[/MENTION]
Guys, I am in the same boat. I have a SSO slimline grill sitting in the garage. It was originally purchased for the 2019 ORP, however, I ended up going with a 2020 and ever since that commitment I've been wondering exactly how it's going to work with the TSS. I am hoping this video will be true for the ORP and that in time, with the bull bar, the sensor will recalibrate and it won't be an issue. The pertinent info is @ ~ 6:00
https://www.youtube.com/watch?v=ZjRzcxgc9GM
DMC12Runner
New member
The only thing I don't like about the 2020s is that damn lunch box in the grill, though I think the TRP PRO hides it a bit better than the other trims. Also, I'm "hearing" I may not like the exhaust now too?! That's it, I'm cancelling my order and getting a Wrangler Rubicon to park next to my Grand Cherokee! (I do have a 2011 Limited with Hemi)
This is good info. If it’s the same sensor, perhaps it can be relocated or at least the wiring can be relocated. This video shows the sensor at around 2:30 and it’s fairly small. I don’t _have_ to have the bull bar but the lower bumper replacement would be nice. With winch some day
xcellr8tion
New member
Congrats. Looks great, very nice photos! The brake calipers aren’t red from the factory are they?
Hey, the brake calipers were a Toyota-Build option. It was like 399$.
CavPro
Member
SE Toyota puts those covers on.
http://toyotaparts.sparkstoyota.com/install/00016-89017inst-2017-4Runner.pdf
http://toyotaparts.sparkstoyota.com/install/00016-89017inst-2017-4Runner.pdf
Last edited:
Thank you! :lookout:
Careless whisper
New member
Ibarkovic Looks fantastic. Congrats. Best photos to date that catch the color. You got me sold, I was on the fence before, definitely going to pick mine up when available
The color is absolutely fantastic.
Just took delivery last night.
Awesome photos. Kind of weird can’t seem them anymore
I am just curious if anyone that has pre-ordered the 2020 pro that got to the port on the 4th of September has actually taken delivery or received a delivery date yet? My dealer has been telling me the first week of October with no actual delivery dates set. Now that is next week so I don’t think that will be happening.
Mine is at the port since the 4th as well. From what I'm being told, there was flooding in some part of the mid-west, preventing deliveries and causing delays. My friend at Toyota checks the "dealer daily" portal website for me every morning and still haven't received a dealer delivery date yet.
Similar threads
