2020 TRD Pro Updates - Army Green & Push Button Start

[violane]

Here’s a link to the canvasback cargo liners.

Toyota 4Runner Cargo Liners | Canvasback.com

[MENTION=402281]violane[/MENTION], you can also get it custom fit for a sliding deck. That’s what I would opt for if I had the sliding deck.

It’s not real clear from the pictures, is the tray part independent if the seat backs? As in, can you still slide the tray with the sliding deck model?

Edit: helps if I read the description, it explains it all.

 

[TeamHeq]

It’s not real clear from the pictures, is the tray part independent if the seat backs? As in, can you still slide the tray with the sliding deck model?

That’s correct. It’s an independent piece. Here’s a YouTube link of a guy installing it in his TRD Pro w/sliding cargo deck:

YouTube

 

[Dune4Runner]

Why do some have blacked out rear 4runner emblems and some have the silver lettering?

 

[gSwift]

Why do some have blacked out rear 4runner emblems and some have the silver lettering?

It may be a dealer installed option. My 2020 emblems were completely blacked out except for the letters on the back. Just got the overlay kit off amazon and installed them last week.

 

[SpaceBanana]

Why do some have blacked out rear 4runner emblems and some have the silver lettering?

Its a blackout kit (overlays usually), TRD PROs and Venture come with it standard. You can purchase them almost everywhere.

 

[gSwift]

Its a blackout kit (overlays usually), TRD PROs and Venture come with it standard. You can purchase them almost everywhere.

My TRD Pro definitely did NOT come with it standard.

 

[Kskramer]

You’re both half right. The trd pro comes standard with black emblems all around except above latch to open the lift gate. For that, you can buy an overlay kit from amazon or the dealer.

 

[jcage89]

Buy the overlay kit... Or Plasti Dip if you're industrious, want to spend way less and want it to look better than having black plastic cup letters over the chrome ones. I used Anthracite Grey (True Metallic) and it looks exactly like the T O Y O T A on the front heritage grille.

Cheers - JC

 

[Crush2.0]

Buy the overlay kit... Or Plasti Dip if you're industrious, want to spend way less and want it to look better than having black plastic cup letters over the chrome ones. I used Anthracite Grey (True Metallic) and it looks exactly like the T O Y O T A on the front heritage grille.

Cheers - JC

Looks great, how many hours to tape it off?

 

[jcage89]

Looks great, how many hours to tape it off?

Uhm, 5-10 minutes prep time, that's not the hard part. If you haven't used Plasti Dip then Youtube how it works... Just use newspapers and painters tape to mask off a square area around the logo so the overspray doesn't hit the rear of the vehicle but the black plastic garnish is OK. Shoot it with the Plasti Dip for 5-7 thin even layers allowing 15 minutes to dry between each layer. Then peel away excess from around the logo and you're set. Biggest mistakes are rushing it (not letting dry enough between each or spraying unevenly or too thick in each layer... really just watch Plasti Dip how to Youtubes and no problem.

Good luck

JC

 

[Crush2.0]

Uhm, 5-10 minutes prep time, that's not the hard part. If you haven't used Plasti Dip then Youtube how it works... Just use newspapers and painters tape to mask off a square area around the logo so the overspray doesn't hit the rear of the vehicle but the black plastic garnish is OK. Shoot it with the Plasti Dip for 5-7 thin even layers allowing 15 minutes to dry between each layer. Then peel away excess from around the logo and you're set. Biggest mistakes are rushing it (not letting dry enough between each or spraying unevenly or too thick in each layer... really just watch Plasti Dip how to Youtubes and no problem.

Good luck

JC

Thank you!!!!

 

[Crush2.0]

Talk to my dealer today, mine is sitting in Chicago and all it says is:
Quality confirmation hold.
Fun!

 

[Steel28]

Got a text/screenshot from my dealer:


- Order Type: DNC - Stock
- At Yard - Processing
- VTN - xxxxxxx
- ETA: From 2019-11-13 To 2019-11-17


He mentioned that VIN will be available on Monday

 

[violane]

Last I heard mine will be hitting port on 11/18, but no eta as to when it's going to make it to my dealer.

Anyone know what Port(s) they tend to hit on the east coast and how long it takes them to get released (generally)?

 

[Steel28]

Last I heard mine will be hitting port on 11/18, but no eta as to when it's going to make it to my dealer.

Anyone know what Port(s) they tend to hit on the east coast and how long it takes them to get released (generally)?

I wonder if "At Yard - Processing" means it's at the port?

 

[violane]

Sure sounds like it.

 

[Crush2.0]

Mine went from port in sept to railcar in oct to processing center in mid Oct. I have a vin.
My guy is telling me they are on hold for some type of quality check, could be something simple or more involved.

 

[mordotz]

Just took delivery of my Army Green TRDP yesterday!

Since there's been quite a few posts on timeline - here's mine.. (I'm in Michigan)

Deposit placed: Aug 1st
VIN/Build sheet received: Aug 6th
Build date: Aug 30th
Delivery to US port: Sept 23rd
Delivery to dealer: Oct 29th

 

[engineeer]

Anyone in the SF Bay Area getting orders through or any sort of information?

Two different dealers, including the one I bought my original TRD Pro from, still haven’t told me when they’re getting allocation.

 

[Crush2.0]

Just took delivery of my Army Green TRDP yesterday!

Since there's been quite a few posts on timeline - here's mine.. (I'm in Michigan)

Deposit placed: Aug 1st
VIN/Build sheet received: Aug 6th
Build date: Aug 30th
Delivery to US port: Sept 23rd
Delivery to dealer: Oct 29th

That’s interesting as I’m in Mi. Hmmm I ordered in July, think I rec BS in a timely manner mine was in port on 9/9.