shootmymime
New member
iirc it was around 45 ish.
3 gauge pod for 3rd gen - interested?
- Thread starter TJM
- Start date
iirc it was around 45 ish.
A.Wilson013
New member
The site take some getting used to, but it's not bad.
Go to the site and on the left click "trucks" which will load a new page.
Now on the left side click "toyota" and another page will pop up with some different options for vehicles.
Look for "4-Runner/Tacoma | 2 pod / full pillar | '96-'00 |"
Once you're there you can see the price ($54.99) and select the option to paint it ($7.99 extra). The oak is a VERY good match... I cannot speak for the grey as I have never seen it.
Scramble
New member
This looks like a good route, do you have a recommendation on gauges?
A.Wilson013
New member
I have only used the AEM digital trans temp, boost gauge, and UEGO wideband AF gauge.
They all work well, come with white or black faces, and silver or black trim rings.
Pretty spendy though. They're around $150 each now. When I bought my UEGO I think it was $220ish.
Scramble
New member
Wow, they look nice though. Black & Silver would go with my color scheme. I think I'm just gonna go with 2 gauges, boost & AF since I have a manual trans. Analog gauges are ok with me. They match the gauges on the dash. The Oak gauge pillar is around $75.
Thanks for the info & I had to Google what a UEGO was. Still need to research & shop around.
Edit:
$196 for analog UEGO
http://www.amazon.com/AEM-30-5130-Analog-Wideband-Ratio/dp/B004J2605Y
$140 for analog Boost
http://www.amazon.com/AEM-30-5132--...d=1456570133&sr=1-10&keywords=aem+boost+gauge
Last edited:
A.Wilson013
New member
I think that any sort of precise tuning with the analog uego would be pretty difficult as you'll be dealing with a tenth of a unit as you try and dial it in.
Unless you don't plan to tune, or you plan to use a tuner which will allow you to data log from the outputs on the uego itself.
Or if you just take it to a dyno. They'll typically use their own exhaust probe for AFR logging with whatever EMS you run.
I'd be interested in a gauge pod. Probably 2 gauge pod for the pillar. But more interested in a pod that can be hidden nicley.
How about a 3D like this but for our steering
Amazon.com: The Toyota Tacoma FlexPod Gauge Mounting Kit 2005-2015: Automotive
http://www.gadgetonline.com/Gauges.htm
https://www.google.com/search?q=the...&q=97+4runner+gauge+pod&imgrc=ge3RS7n2WwazVM:
I wonder how he did this !!
How about a 3D like this but for our steering
Amazon.com: The Toyota Tacoma FlexPod Gauge Mounting Kit 2005-2015: Automotive
http://www.gadgetonline.com/Gauges.htm
https://www.google.com/search?q=the...&q=97+4runner+gauge+pod&imgrc=ge3RS7n2WwazVM:
I wonder how he did this !!
Last edited:
Aelfwine
New member
My work in progress. I bought a hilux triple DIN piece off ebay and thought it would just fit plug and play. No way, its a completely different shape piece and all the clips are a mirror image. So I cut it up and cut mine up and made them into one. Its almost finished now, a little more bondo, sand and paint. I was gonna get a quote to have it 3D scanned and printed. I'll post some pics once its done and installed.
