• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

3rd gen 3/16" steel skid plates

isu2014

isu2014

New member
Closed! But I have extras to sell!


Ryno All Terrain Products is at it again.... I am offering a group discount on my skid plates for 1st gen Tacomas and 3rd gen 4Runners. I will run this group buy until April 30th. A $250 deposit is due April 30th. The rest can be paid when the order is ready to ship.


RACK COVERAGE SKID: Included in purchase is an extended IFS skid plate that covers the steering rack and all necessary hardware to install.
Weights:
1/8" = 42 pounds
3/16" = 60 pounds

3 PIECE SET: Included in purchase are IFS, transmission, transfer case skids, and all necessary hardware to install.
Weights:
1/8" = 85 pounds
3/16" = 120 pounds

Details:
3/16" or 1/8" high strength cold rolled steel (stronger than hot rolled other vendors use)
45-60 pounds a piece
Factory mounting holes
Cutout for engine oil drain plug
Replaces factory skid plates
Works with diff drops - no spacers needed
Not painted or powdered - $125 extra for black powder coat

Manufacturing time is 2-3 weeks from when I order. I will ship when the order is complete.

Shipping will be fedex ground. Pay by paypal, cash, check.

PM for shipping quotes...
For rough shipping cost estimates on a set:
Colorado: $75
California: $100
Massachusetts: $90
Florida: $90
Texas: $75
Kentucky: $75

The skids are produced with no cutout as standard, but if you would like a cutout, I can do almost anything you would like for $35 extra.

Email me at [email protected] if you don't have an account here but want skids.


The List:
1. TX78666 (T4R) - Full set, 3/16", cutout
2. infamousRNR (T4R) - Full set, 3/16"
3. DoubleCab362 (TW) - Full set, 1/8"
4. KaliKid (T4R) - Full set, 3/16", cutout
5. 00yotasr5 (TW) - Rack coverage, 3/16"
6. dennisc (TW) - Full set, 3/16", powder coat
7. BOWSandTACOS (TW) - Full set, 1/8"
8. erinkgarvey (TW) - Rack coverage, 3/16", cutout
9. kolelt (T4R) - Rack coverage, 3/16"
10. DisJayFo0 (T4R) - Full set, 3/16"
11. Could be you!



3 PIECE SET































RACK COVERAGE SKID
$T2eC16F,!y0FI,UwmyruBSN5vTQtFg~~60_3.JPG~original


4ajuzuve.jpg~original




uqa9eve2.jpg~original





 
Last edited:
Register to hide this ad
I don't use a box, I just stretch wrap the skids in a sammich and tape around the edges. The package is about 40" x 28" x 7".
 
I get a pretty sick discount for FedEx through work...if I was to provide the shipping label for you for FedEx ground, would you be ok with that?
 
Roguestatus1688 said:
I get a pretty sick discount for FedEx through work...if I was to provide the shipping label for you for FedEx ground, would you be ok with that?
Click to expand...

Oh yeah, that's no big deal. I use fedex since I get a 20% discount. It helps the customers out quite a bit on something like this.
 
I forgot to add that 1/8" thick is still a possibility for this group buy. It was a hot seller last time in the rack coverage skids. Same price.
 
Did you ever sell any at 1/4" thickness last go around? Still have access?
150 pounds total for the 3 piece set in 3/16"?

What grade steel is this?
 
i got in on the last group buy and am sure glad I did, a lot of people regretted not doing so, if you're on the bubble, get them! easy mounting, great strength and fitment. Ryan is a good guy and will treat ya right.
 
4eigner said:
Did you ever sell any at 1/4" thickness last go around? Still have access?
150 pounds total for the 3 piece set in 3/16"?

What grade steel is this?
Click to expand...

I haven't sold any 1/4" yet. If I do, the set would have to ship Fastenal since it would be over 150 lbs. A full set in 3/16" is 120 lbs. The grade of steel is ASTM A1008.
 
You must log in or register to reply here.

Members online

Total: 7,637 (members: 3, guests: 7,634)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top