3rd Gen Projector Retrofit. Seattle, WA $260

[sogoood]

SOLD

Redoing my whole front end setup!

-Toyota OEM headlight housings
-Morimoto FXR 3.0 3" lens
-Morimoto Apollo 3.0 shrouds

Non-daily vehicle. Low on-time hours. Projector bowls are not burnt and look new. OEM phillip d2s bulbs were used with 35w ballasts.

Built by me. I took extra care and took extra time getting it perfect. The projector beam was measured over and over to match as closely as i could with the oem reflector beam. The projector was NOT slapped on and aimed later. This is important if you want your headlight to be flush with the body since aligning the beam involves adjusting the whole headlight. Ive invested hours of work into getting these perfect for myself and id never feel good with a half ass retrofit haha.

I paired this setup with the Rigid Ind. DOT/SAE fog and it was GODLY

I have a wall picture somewhere but i might have to go out and take another one. I do have dash cam footage below. Note- They are aimed pretty low and i also didn't have my gear loaded in the back so my rake was crazy (LC coils).

Dashcam footage - Please mute video. I got lazy and just uploaded the source video. Didn't want to edit it. More driving footage is available if you want.

Can someone help me embed this video? i dont know the "code"

Youtube link - Morimoto FXR 3.0 35w 5500k


Does not include ballast, harness, bulbs, ignitors

Sneak peek of my new TNF bumper!

Check out my other ads!

JDM Hilux Surf 185 headlights, fender set+mirror, and 01' power folding mirrrrrrrors! (not listed yet =P).

 

[JWaldz]

$260

Redoing my whole front end setup!

First in line please (if first)..

PM'ing you

 

[sogoood]

All PMs replied!

I will not be able to ship out til after this weekend.

some pictures i found. iPhone Smart HDR has lessened the impact of hot spots. they are bright and i have more pics without smart HDR if you want. HDR helps to see the beam better instead of having a blown out picture.

FXRs Vs. oem Lexus RX projectors

I was pretty close to the wall.

HDR flattened out the intensity of the light but helps show its alignment better.

 

[llDemonll]

I'm not interested, but for people buying:

Do these include bulbs and ballasts so that they're full "plug-and-play" or will they need to purchase those items separately?

 

[sogoood]

That has already been addressed in the first post. Please read my ad entirely. thanks

 

[llDemonll]

Ok, since you want to be a treat about this:

-Toyota OEM headlight housings
-Morimoto FXR 3.0 3" lens
-Morimoto Apollo 3.0 shrouds

Non-daily vehicle. Low on-time hours. Projector bowls are not burnt and look new. OEM phillip d2s bulbs were used with 35w ballasts.

Your phrasing in this context implies that the items include in the sale are the three listed in bullet points. You do not make any indication that bulbs and ballasts are included with the sale, only that while you were using the headlight assemblies on your car that you used the listed bulbs and ballasts.

 

[sogoood]

Thanks for looking at my ad entirely.

What is not stated shouldn't be on the *included list anyway.

Does that answer your question?

Ok, since you want to be a treat about this:



Your phrasing in this context implies that the items include in the sale are the three listed in bullet points. You do not make any indication that bulbs and ballasts are included with the sale, only that while you were using the headlight assemblies on your car that you used the listed bulbs and ballasts.

 

[Jayjayb96]

Good thing [MENTION=58830]JWaldz[/MENTION] pmed you. I saw this posting soon as it dropped and i almost pmed you too LOL. I really need to do my timing belt and nose cone before i can think if other mods.

Otherwise awesome deal!

 

[xdustin]

front bumper looks sick

 

[TaKOma]

Do you have any pictures of the back of the headlights?