3rd gen skids by RAT Products! I'm back! Cheapest ever!

[isu2014]

I'm back! RAT Products is offering a group discount on all skid plates for 1st gen Tacomas and 3rd gen 4Runners. Steel is cheap right now, so I'm coming out guns blazing with low pricing. I will run this group buy until March 1st. A $250 deposit is due by March 1st. The rest can be paid when the order is ready to ship. Choice of 1/8" or 3/16" thick for light weight or extra strength.


Here is everything I am offering:

3 PIECE SET Included in purchase are IFS, transmission, transfer case skids, and all necessary hardware to install. Drilling into the frame is required.
Weights:
1/8" = 87 pounds
3/16" = 123 pounds

RACK COVERAGE SKID Included in purchase is an extended IFS skid plate that covers the steering rack and all necessary hardware to install to factory mounting location.
Weights:
1/8" = 42 pounds
3/16" = 60 pounds


Details:
3/16" or 1/8" steel
40-60 pounds per piece
Uses factory mounting holes are used except on transfer case skid
Cutout for engine oil drain plug included
Replaces both factory skid plates
Works with front differential drops - no spacers needed
Not painted or powder coated

OPTIONS:
CUSTOM CUTOUTS ON THE FRONT SKID WILL BE $60 EXTRA

ANGLE IRON REINFORCEMENT WELDED ON TRANSFER CASE SKID WILL BE $75 EXTRA


Manufacturing time is approximately 4 weeks from when I order. I will ship when the order is complete.

Shipping will be fedex ground. Pay by paypal, cash, or check.


For rough shipping cost estimates on a 3 piece set:
Colorado: $85
California: $100
Massachusetts: $100
Florida: $100
Texas: $85
Kentucky: $85



Email me at [email protected] if you don't have an account here but want skids.



3 PIECE SET

I made a couple minor beneficial updates to the current skids, but the fit is all the same.

































RACK COVERAGE SKID

Previous sale threads with more info and whatnot:
RAT Products Skid Plates - 1st gen Tacoma, 3rd gen T4R - Tacoma World Forums
Skid plates from RAT Products - 1st gen - Tacoma World Forums

3 piece skid installation instructions:
RAT Products Skid Plate Install Write up - Tacoma World Forums

 

[isu2014]

The official list (skids):
1. Jeff Butts (TW) - Full set, 3/16"
2. MattJakobs (TW) - Full set, 1/8"
3. otis24 (TW) - Full set, 3/16"
4. Penten (TW) - Full set, 3/16"
5. Panman (T4R) - Full set, 3/16"
6. wildfyr3 (TW) - Full set, gas tank, 1/8"
7. Robmonster117 (TW) - Full set, 3/16"
8. 2000tacobro (TW) - Full set, 3/16"
9. condortaco (TW) - Full set, 1/8"
10. N128CG (TW) - Full set, fuel tank, 3/16"
]11. Eric (FB) - Rack coverage, 1/8"
12. Andrew (email) - Rack coverage, 1/8"
13. Masi99 (TW) - Full set, fuel tank, 1/8"
14. rbgerrish (T4R) - Full set, 3/16"
]15. Trowbocop (TW) - Full set, fuel tank, 3/16"
16. Tac03trd (TW) - Trans + Transfer, 1/8"
17. Bhavin (email) - Full set, 3/16"
18. Bhavin (email) - Full set #2, 3/16"
19. Savysav (TW) - Full set, 3/16"
20. albrow (TW) - Full set, 3/16"
21. joshua (email) - Rack coverage, 3/16"
22. stikle (TW) - Full set, 3/16"
23. Tyota89 (T4R) - Full set, 3/16"
24. Kevin (FB) - Full set, 1/8"
25. No_Dak (T4R) - Full Set, 3/16"
26. Atomic6 (T4R) - Full set, 3/16"
27. MR2 (TW) - Full set, fuel tank, 3/16"
28. gunnar#1 (TW) - Full set, 3/16
]29. synergy10 (TW) - IFS + trans, fuel tank, 3/16
30. 1eyedclyde (TW) - Full set, 1/8"
31. Logger (TW) - Rack coverage, 1/8"
32. Exhaust (TW) - Full set, 1/8"
33. 12BYotaFan (T4R) - Full set, 3/16"
]34. fiziks (TW) - Full set, 3/16"
35. chasingmagiclight (T4R) - Full set, 1/8"

Bumpers:
1. 00yotasr5 - Welded dual swingout, dual jerry can, lic plate brkt
2. condortaco - Welded swingout, dual jerry can, lic plate brkt
3. gunnar#1 - Welded, lic plate holder

 

[Scramble]

I'd be interested in the gas tank skid when it's ready.

 

[Panman]

What would the lead time on these be?

 

[isu2014]

What would the lead time on these be?

I will put in the order March 1st, then they take about 4 weeks from there. So I should be shipping 1st week of April.

 

[ThorInc]

I'd be interested in the gas tank skid when it's ready.

^^^^This!

 

[Panman]

I will put in the order March 1st, then they take about 4 weeks from there. So I should be shipping 1st week of April.

I just looked back and saw the four weeks in the original post, sorry, I was on my phone and obviously didn't check well enough.

Count me in for a set of three in 3/16"


Panman - Full Set, 3/16"

 

[isu2014]

I just looked back and saw the four weeks in the original post, sorry, I was on my phone and obviously didn't check well enough.

Count me in for a set of three in 3/16"


Panman - Full Set, 3/16"

Got it, thanks!

 

[isu2014]

Updated.

 

[Panman]

The official list (skids):
1. Jeff Butts (TW) - Full set, 3/16"
2. MattJakobs (TW) - Full set, 3/16"
3. otis24 (TW) - Full set, 3/16"
4. Penten (TW) - Full set, 3/16"
5. Panman (T4R) - Full set, 3/16"
6. wildfyr3 (TW) - Full set, gas tank, 1/8"
7. Robmonster117 (TW) - Full set, 3/16"
8. Panman (T4R) - Full Set, 3/16"
9. 2000tacobro (TW) - Full set, 3/16"
10. condortaco (TW) - Full set, 1/8"
11. N128CG (TW) - Full set, 3/16"
12. Eric (FB) - Rack coverage, 1/8"
13. Andrew (email) - Rack coverage, 1/8"

I'm on here twice, I only want one set.

 

[isu2014]

I'm on here twice, I only want one set.

Oops! Got it. Thanks.

 

[rbgerrish]

I'm in for a set of 3, 3/16"!

 

[Lego3k1]

Got you're 3 piece set used from a member. Awesome product, will be purchasing the gas tank slid once available for my 4Runner!

 

[isu2014]

Added, thanks everyone!

 

[isu2014]

Quiet in here!

 

[Tyota89]

Put me down for a set.. Just ruin my 2nd set of oem skids.

 

[No_Dak]

Put me down for a set.

No_Dak (T4R) - Full Set, 3/16"

 

[isu2014]

Updated! Thanks!

 

[isu2014]

Added another!

 

[toyopnoy]

Interested in gas tank skid, any photos?