3rd Gen T4R Picture Gallery

[KUHLNESS]

35s with no body lift

So awesome. I plan on doing the same, how much cutting did you have to do and how much rubbing are you experiencing?

 

[TCMach]

Just a little pic at the campground in Moab
<a href="https://www.flickr.com/photos/102663750@N03/16234278594" title="IMG_0580 by Tyler Carvell, on Flickr"><img src="https://farm8.staticflickr.com/7647/16234278594_845bc91430_c.jpg" width="800" height="597" alt="IMG_0580"></a>

 

[BrandonF]

So much like on this page!

 

[CenCalifoothill15]

recent trip-

 

[shouldbeasy]

So awesome. I plan on doing the same, how much cutting did you have to do and how much rubbing are you experiencing?

Uh... He would have had to cut lots off, take out a big hammer and start swinging, adjust the caster a couple degrees forward and it will probably still rub.

Search for 'Trails less Traveled: How to Clear 35" Tires' and you'll see how to do things properly without a body lift. It's a lot of work.

 

[daniresch]

Uh... He would have had to cut lots off, take out a big hammer and start swinging, adjust the caster a couple degrees forward and it will probably still rub.

Search for 'Trails less Traveled: How to Clear 35" Tires' and you'll see how to do things properly without a body lift. It's a lot of work.

I cut no where close to how 'trails for less traveled' did.
Really wasn't that difficult. I was just gonna post some pics but didn't want to thread jack this page with a how-to clear 35s.

 

[shouldbeasy]

I cut no where close to how 'trails for less traveled' did.
Really wasn't that difficult. I was just gonna post some pics but didn't want to thread jack this page with a how-to clear 35s.

Really? Ya, start a thread or go to the official '3rd gen on 35" tires' thread and post up. I'm interested to see what you did.

I've got the Camburg UCA's so they automatically adjust the caster back a couple degrees, enhancing the rear body mount rub. Perhaps with stock UCA's it's not as bad?

My flares are trimmed, the body mount is trimmed, the bottom of the 1/4 panel is trimmed and slightly 'popped' outwards from rubbing... Also, the BFH strategy on the firewall.

 

[4Running Daily]

Couple photos from the last few months
DSC_0280 by 4Running Daily, on Flickr
IMG_4424 by 4Running Daily, on Flickr

 

[wslytoy]

Running board delete mod so skrong!

It annoys the sheet outta me that the driver side fender is dinged here & I can't get my headlight trim to plug in. Yes I'm anal.

Anyone gotta green fender they wanna ship me? Ha!

 

[SupaSupra]

My 01 SR5:

 

[skcolb]

Picture is from last weekend in the Caliente Range of Carrizo National Monument in central CA.

 

[Chuckles89]

My 01 SR5:

Holy huge picture, Batman! :rofl:


Cool wheels!

 

[CenCalifoothill15]

:fish2:

 

[mistaj0hnny]

@ Torrey Pines State Reserve

 

[GVL]

Saturday afternoon drive through the forest with my best friend - doesn't get much better than that.

 

[TheArkMaster]

Saturday afternoon drive through the forest with my best friend - doesn't get much better than that.



View attachment 150340

Such a good looking truck man

 

[Docs4Runr]

 

[sar4x4]

Got to play today.

 

[eurolatin336]

well just got my first 4runner , and so far loving it. and of course i did the running board delete

 

[Stockwell45]

Tie rod Tuesday