3rd row drawer system Part 1

[themuffinman619]

I have a third row model and this is exactly what I was looking for. Awesome work OP!

 

[Magnetic4R]

Decided to ditch the 3rd row seats. So now, time to build a new drawers system. This time, using 18mm Baltic Birch plywood with Accuride 600lbs lockin lockout slides. Today's progress: removed 3rd row and fitted plate system for the drawers. They will be don't down to the factory floor bolt.....

 

[Antman]

Decided to ditch the 3rd row seats. So now, time to build a new drawers system. This time, using 18mm Baltic Birch plywood with Accuride 600lbs lockin lockout slides. Today's progress: removed 3rd row and fitted plate system for the drawers. They will be don't down to the factory floor bolt.....

I had to chuckle at this. Once you start building a storage system you are always thinking of making it better- I swear it's some sort of disease! I'm on my 3rd and thinking of a 4th...lol

Nice work BTW.

 

[Magnetic4R]

I had to chuckle at this. Once you start building a storage system you are always thinking of making it better- I swear it's some sort of disease! I'm on my 3rd and thinking of a 4th...lol

Nice work BTW.

I have a feeling this may not be my last either. Made a 2nd one for [MENTION=134661]Xtremluck[/MENTION] , needless to say, his turned out to be better then mine.

Decided to add a slide out table while I'm at it.

 

[themuffinman619]

Top left drawer for tools, bottom left for recovery gears , right for camping gesrs and Husky mobile his for camera gears or mt. biking gears.

Do you have some sort of latch system to keep the drawers closed? And what did you use the chalk board for?

 

[dot_tom]

I like that slide out table! Looking good.

 

[Magnetic4R]

Do you have some sort of latch system to keep the drawers closed? And what did you use the chalk board for?

I used locking pins. The chalkboard was for the based of the small drawers

 

[Magnetic4R]

Slides, ready for new drawers

 

[themuffinman619]

Slides, ready for new drawers

Nice! Which slides are those?

 

[Magnetic4R]

Accuride 9803