TheShowtime
New member
Hey guys, my 4Runner doesn’t have any emblems on the tailgate. Previous owner took them all off. I only have the the Toyota emblem in the middle. Does anyone know an easy way to place the emblems factory spec?
4Runner emblems
- Thread starter TheShowtime
- Start date
Register to hide this ad
ToyotaBrah
Member
3M double sided tape. I've used it on an emblem and it worked perfectly.
You have to cut it to fit the contour of the emblem. An exact knife and patience are key.
https://www.walmart.com/ip/3M-Super...MI2ObOi4SN5QIVEfDACh0uTQcjEAQYASABEgISgvD_BwE
Also, if you need a 4Runner emblem, let me know. Think I have one sitting around.
You have to cut it to fit the contour of the emblem. An exact knife and patience are key.
https://www.walmart.com/ip/3M-Super...MI2ObOi4SN5QIVEfDACh0uTQcjEAQYASABEgISgvD_BwE
Also, if you need a 4Runner emblem, let me know. Think I have one sitting around.
TheShowtime
New member
Oh no guys I meant is there an easy way to place the emblems on the truck like it came out the factory. I’m pretty sure I just have to look at a picture of a 3rd gen and guess? Looking to see if there’s a more accurate way though. But thanks for the replies and offers!
Also it’s an 01
Also it’s an 01
ToyotaBrah
Member
Ah, I follow you now! I would provide you with measurements but my tail gate was repainted and the emblems are slightly off from where they should be. However, I do have a pic of mine next to its twin, and I believe that the emblems on that truck are in the factory location. Also, the dealership decal is a good indicator it's original back there. You can tell the 4Runner emblem on mine is slightly elevated compared to the other truck's. Also the 4WD emblem on mine should be lower. After I noticed this, it has bothered me. Wish that truck never parked next to me, haha.
On the list of things to do is to reset the emblems to factory location. I just need to find the exact measurements on where they go. I might scope out a 4Runner in the parking lot and bust out my ruler if I get desperate enough. Hopefully I don't get arrested.
Here's that pic (mine is on the right):
Last edited:
TheShowtime
New member
Haha I’m pretty ocd with this stuff also and these emblems aren’t cheap! Wish I knew someone else that owns a 3rd gen 4Runner so I can get measurements. I think I’m just not going to peel the back off the emblems and just put some tape on the back and look at pics until I get it right. Thanks for the pictures tho!
Killer Squirrel
Member
I took these when I removed my emblems just in case I put them back later, hopefully this will help someone.
TheShowtime
New member
I took these when I removed my emblems just in case I put them back later, hopefully this will help someone.
Hey man thanks! That’s exactly what I needed!
TheShowtime
New member
Quick question the vertical measurements on the sr5 and 4wd pictures cuts off at the top. Is that exactly where it ends?
Killer Squirrel
Member
That's where the photos end, I was using the contour line in the rear door as a reference point if that makes sense.
TheShowtime
New member
Gotcha that makes perfect sense. Thank you!
TheShowtime
New member
Yeah the 96-98 doesn’t have one, you would only have one if you owned a 99-02 model. Also the emblem placements are different.