4th gen body lift

[BlackWorksInc]

Possibly, but the whole body and everything attached to it is riding on it... Literally, I'd Err on overkill myself. Grade 5 may do. I don't remember what my bolts were.

Sent from the drivers seat of my 05 4runner.

If I remember right they are something like Grade 8 for that application. I think I went with new Grade 8 or Grade 10 stuff when I went with longer bolts. Finding metric stuff was such a pain though.

 

[t-man]

If I remember right they are something like Grade 8 for that application. I think I went with new Grade 8 or Grade 10 stuff when I went with longer bolts. Finding metric stuff was such a pain though.

The bigger bolts from RB are standard. You have to drill a 1/2 which barely touches but clears the way for the new hardware.

Sent from the drivers seat of my 05 4runner.

 

[DCameraMan]

Researching body lifts right now. What do you do with the bumper? Does it go up with the body lift of do you have to mod it. I'm likely going to do the toytec 1" BL

 

[MrSeth]

Roger Brown or Fat Pat. I like how they do what they do, but I machined my own lol- they didn't make them tall enough.

 

[K_Labs]

Roger Brown or Fat Pat. I like how they do what they do, but I machined my own lol- they didn't make them tall enough.

Need more info... How high did u go? What are the dimensions?

 

[MrSeth]

Need more info... How high did u go? What are the dimensions?

I did 2.5" for mine from Delrin. I think the fronts are 2.5" dia and the rears are 3" dia. The hardest parts were fabricating rad drops, a steering spacer, and finding long enough grade bolts. At the time, I had access to a drop saw and lathe, took about an hour to fab and 3 hours to install.

 

[neokhz]

Body Lift issues

I installed a 1.5 BL and after did zero point and unhooked battery for a while to clear up everything. However my steering wheel controls are not working now. No audio controls, no horn... What have I done wrong?