4th Gen specific for sale thread
- Thread starter wadle5
- Start date
wtcnbrwndo4u
Member
Curious, what did you end up doing for your current setup? Just sticking with the 03 headlights and grille?
I decided to do the same, and maybe do a Satoshi on the 2003 grille, but it does seem like a ton of work. I dunno. I'm retrofitting the headlights with HIDs from TheRetrofitSource though.
tannerk15
New member
Yea I ended up just keeping everything stock. Switched my focus from aesthetics to protection.
dpaskoff90
New member
2004 T4R Tailgate Window Regulator and Motor
Just like the title says! In need of a 2004 T4R Tailgate Window Regulator and Motor. Would rather not have to go through Toyota factory.
Thanks!
Just like the title says! In need of a 2004 T4R Tailgate Window Regulator and Motor. Would rather not have to go through Toyota factory.
Thanks!
tannerk15
New member
4th Gen Parts Listed in General Classifieds!
-2 Satoshi Grille Projects w/ Mesh and Emblem for 1
-2006-2009 Headlights in good condition w/ everything needed to do the swap on a 2003-2005!
-OEM Running Boards off of a silver 2003 Limited
-OEM Bumper off of a silver 2003 w/ all installation hardware and fog lamp/turn signal housings
LINK: 4th Gen Parts! 2 Satoshi Grille Projects, 2006-2009 Headlights, and more!
Let me know if you're interested in anything! Located in Central North Carolina/ Southern Virginia.
Post has been updates with prices and pictures!
-2 Satoshi Grille Projects w/ Mesh and Emblem for 1
-2006-2009 Headlights in good condition w/ everything needed to do the swap on a 2003-2005!
-OEM Running Boards off of a silver 2003 Limited
-OEM Bumper off of a silver 2003 w/ all installation hardware and fog lamp/turn signal housings
LINK: 4th Gen Parts! 2 Satoshi Grille Projects, 2006-2009 Headlights, and more!
Let me know if you're interested in anything! Located in Central North Carolina/ Southern Virginia.
Post has been updates with prices and pictures!
wmflyfisher
New member
WTB: Factory 4th gen limited 18" wheels
Looking for a set of 4th gen factory 18" wheels. Condition doesn't matter as long as they are not warped and not totally trashed. Text me at 7065405058 or PM me if you have a set. Thanks
Looking for a set of 4th gen factory 18" wheels. Condition doesn't matter as long as they are not warped and not totally trashed. Text me at 7065405058 or PM me if you have a set. Thanks
wheelin.trd
New member
wtb coilers and uca
icon
king
or fox
icon
king
or fox
wheelin.trd
New member
Looking to sell my Camburg UCAs for net $475 shipped with a brand new genuine replacement Uniball. The arms are 18 months old and have been religiously greased and lubed with TriFlow lubricant.
I have 100% eBay feedback and thousands $$ of camera gear sold on FredMiranda.com camera forums. A few things to note.
1. There was some minor 12-6 play in the driver side. Camburg sent me a replacement Uniball.
2. Minor galling on the through-bolt threads that will clean up with a die.
3. Minor gouging on the passenger side mis-alignment spacer from removal. This does not affect assembly.
4. I cannot separate the mis-alignment spacer from the driver side with my minimal city-apartment hand tool selection. Should not affect install.
5. I misplaced one of the 90° zerk fittings. You will need one more.
6. What you see is what you will receive.
Feel free to ask any questions!
Thanks,
Will
Still Available?
wmflyfisher
New member
WTB: Factory running board
I need just the passenger side factory running board for my 05 limited. It's the black one with the 2 lights at each end. Please text or PM me if you have one. 7065405058
I need just the passenger side factory running board for my 05 limited. It's the black one with the 2 lights at each end. Please text or PM me if you have one. 7065405058
williamteichroeb
Member
I Have one!
Hi, I just literally installed my demello bumper and have my oem one in literally perfect condition for sale!!! I can even include the fog light assemblies and bash bar/frame brackets etc, and all hardware that I took off!!!
I'm in Fernie, british columbia. Montana is only an hour drive from me. I imagine shipping would be ridiculously expensive but I'm open to options? Not sure how far vancouver BC is for you, but I'm heading there this summer?
Hi, I just literally installed my demello bumper and have my oem one in literally perfect condition for sale!!! I can even include the fog light assemblies and bash bar/frame brackets etc, and all hardware that I took off!!!
I'm in Fernie, british columbia. Montana is only an hour drive from me. I imagine shipping would be ridiculously expensive but I'm open to options? Not sure how far vancouver BC is for you, but I'm heading there this summer?
williamteichroeb
Member
Also not sure when you need it by but I'm heading to Vancouver, BC, around 1st week in July, and could possibly bring it then (if you're in Auburn that's about a 3.5hr drive north.
TheFauxFox
New member
Looking for a sport hood for 06-09 in black in the southeast area... Would be willing to trade hoods or throw down some cash. Thanks!
theoutbackdream
New member
WTB 2nd row seat recline button P/N: 72661-35010-B0. Figure i'd try here first..
AuSeeker
Elite Member
You may want to state what color your interior is in case someone here has one for you.
That being said you can get a new one w/ shipping included for around $15 or less, you'll come close to that paying the shipping if someone on here gives you one for free.
theoutbackdream
New member
The PN ending in B0 is the beige, which is what i'm looking for. B1 is for the grey interior.
True true. Just figure someone might have it.
4thgenfinatic
New member
I have a 08 sport with the chrome grille in minty mint condition. Anyone out there have a silver limited in metallic silver they want to trade?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
