4th Gen specific for sale thread

[HCWatson997]

FS: 3” front strut spacer / $40 OBO+shipping / Northwest Arkansas

3” lift aluminum strut spacer with extended studs included. These were on for less than 10k miles as I decided to switch to a full suspension lift. These are also XREAS compatible and have NO preload. Asking $40 OBO + shipping (negotiable). Located in Northwest Arkansas.

 

[KruzSR5]

FS: Husky floor mats and Salex OCD console divider In Chicago area

I traded in my 04 4R. Anyone needs a front and rear set of black Husky floor liners or a console divider. Very good condition and used for less than a year. $60 for liners and $10 for organizer.

 

[LASurf]

Hi guys,
Does anyone have one of these laying around?

Mine is missing and it's someting I actually miss from my Jeep. I travel to Orlando sometimes and rarely have cash so I usually rely on my emergency coin stash. I hate just having it piled up in a pocket.

I wish I had mine too my runner got broken into and they took mine! I mean take the change but leave the holder. I'm currently rocking a red solo cup. Best of luck brother.

 

[simple]

I wish I had mine too my runner got broken into and they took mine! I mean take the change but leave the holder. I'm currently rocking a red solo cup. Best of luck brother.

Ive got a coin holder for sale for 15 shipped if anyone is interested.

 

[Berty_K]

Got running boards for sale off an '08 SR5. PM me if interested.

 

[LASurf]

Ive got a coin holder for sale for 15 shipped if anyone is interested.

Twistedfocus should get this one.

 

[KruzSR5]

I traded in my 04 4R. Anyone needs a front and rear set of black Husky floor liners or a console divider. Very good condition and used for less than a year. $60 for liners and $10 for organizer.

I am about 35 miles west of Chicago i Batavia. PMs replied to though for some reason my aren’t folder is empty?

 

[nuron]

I am about 35 miles west of Chicago i Batavia. PMs replied to though for some reason my aren’t folder is empty?

I sent you a PM but didn't get a reply. I'll cancel on the organizer since I'm not in the Chicago area.

 

[cloud]

I traded in my 04 4R. Anyone needs a front and rear set of black Husky floor liners or a console divider. Very good condition and used for less than a year. $60 for liners and $10 for organizer.

Pics? Please. I just slaughtered my rear floor mats for traction when I was stuck on loose soil on a rock. Is this organizer compatible with a console vault?

 

[cloud]

3” lift aluminum strut spacer with extended studs included. These were on for less than 10k miles as I decided to switch to a full suspension lift. These are also XREAS compatible and have NO preload. Asking $40 OBO + shipping (negotiable). Located in Northwest Arkansas.

Is this what typical front spacers look like? I was expecting something different. Why are they unsafe exactly? Also, do you happen to know why I can't pass the sacred 3" lift mark?

I'm also curious why I can't get a beefy knuckle like the 2wd guys have. It's like decaf coffee, what's the damn point?! But I wish I could just bolt on 3" of lift without something stupid happening.

 

[HCWatson997]

Is this what typical front spacers look like? I was expecting something different. Why are they unsafe exactly? Also, do you happen to know why I can't pass the sacred 3" lift mark?

I'm also curious why I can't get a beefy knuckle like the 2wd guys have. It's like decaf coffee, what's the damn point?! But I wish I could just bolt on 3" of lift without something stupid happening.

There are two types of spacers that I know of, which are spring spacers and strut spacers. Spring spacers go between the spring and the strut which creates an uncomfortable preload and stiffens the ride really bad. This one is a strut spacer which just pushes the whole strut and spring down from the strut mount 3” which does not create preload. This can just be bolted in without having to take apart the front “coilover” assembly. Thus, can be used with XREAS.

For not going above 3”, it is because your geometry will be too out of wack and will NEED new upper control arms to drive it. Also if you are 4x4, then your CV’s (front drive axles) will be put at a weird angle if you go above 3”. Some do a front differential drop but that is debatable if it works or not. I never had any trouble with this setup, just needed an alignment after install.

 

[cloud]

There are two types of spacers that I know of, which are spring spacers and strut spacers. Spring spacers go between the spring and the strut which creates an uncomfortable preload and stiffens the ride really bad. This one is a strut spacer which just pushes the whole strut and spring down from the strut mount 3” which does not create preload. This can just be bolted in without having to take apart the front “coilover” assembly. Thus, can be used with XREAS.

For not going above 3”, it is because your geometry will be too out of wack and will NEED new upper control arms to drive it. Also if you are 4x4, then your CV’s (front drive axles) will be put at a weird angle if you go above 3”. Some do a front differential drop but that is debatable if it works or not. I never had any trouble with this setup, just needed an alignment after install.

So if I get some CV axles from cvj for a 5" lift, with my light racing uca's and my stock lower control arms (new bushings, soon too be new ball joints) would this setup work off-road? Realistically is this aluminum (or the cast iron product available online) safe for off-road racing? What about off-road abuse without the high speed jumps?

 

[KruzSR5]

Pics? Please. I just slaughtered my rear floor mats for traction when I was stuck on loose soil on a rock. Is this organizer compatible with a console vault?

I’m meeting someone for mats in an hour. Not sure how far vault stick up by this rests flush on top sides of console and seats itself about 1.5-2 inches into the well.

 

[KruzSR5]

Mats sold. Thanks!

Salex OCD Organizer still available.

 

[HCWatson997]

So if I get some CV axles from cvj for a 5" lift, with my light racing uca's and my stock lower control arms (new bushings, soon too be new ball joints) would this setup work off-road? Realistically is this aluminum (or the cast iron product available online) safe for off-road racing? What about off-road abuse without the high speed jumps?

These would work offroad just not as well as offroad shocks and springs. Also this is my .02 but I personally would never do jumps with anything other than long travel for the fear of killing my shocks and struts

 

[Chreaus]

FS: 2006 Limited Roof Rack.

Original Roof rack set up off of my 2006 Limited. All black.
2 of the covers (feet) have cracks from removal, but still hold tight on the vehicle.

Will post/email pics if anyone is interested.

Willing to give it away for cost of gas/shipping + small service fee.

I am near Morgantown WV.
PM me if interested.

Last try to sell/give this away as whole unit.
Those interested in just the caps I will be ready to get rid of them next week.

 

[wtcnbrwndo4u]

Original Roof rack set up off of my 2006 Limited. All black.
2 of the covers (feet) have cracks from removal, but still hold tight on the vehicle.

Will post/email pics if anyone is interested.

Willing to give it away for cost of gas/shipping + small service fee.

I am near Morgantown WV.
PM me if interested.

Last try to sell/give this away as whole unit.
Those interested in just the caps I will be ready to get rid of them next week.

I'd jump on all four caps if you're willing to ship them.

 

[drbyrdman]

-stock sport running boards OBO.
-front and rear stock sway bars OBO
-stock roof rack and cross bars OBO
OBO just want them gone

bump

 

[Dads07sport4R]

MISC 4th gen parts(Bay Area)

I’m trying to clean out the garage guys- help me out. I would prefer to do local pick up in the east bay. Shipping on the small stuff would probably be okay.

Super bull bar- $60-SOLD
Daystar budget boost- $30
Daystar rear 1.5 spacers- $30
09 Tacoma 4x4 front coils(13,000miles)- $45
Midwest dog barrier- $25-SOLD

 

[wtcnbrwndo4u]

Figured I'd crosspost here.

I have the stock air box with all tubes/pipes included, no hydrocarbon filter. No bolts. $100 + shipping.

Also for sale, an AFe Power Pro Dry filter. Used for about 15K miles. $45 shipped.

Located in Kansas City, 64114.

Thanks!