4th Gen specific for sale thread

Thanks for link. Instead of dumping another $75 into a rack I won’t use I may as well pull it off and part it out. Maybe help pay for some headlight or tail lights.

I have a Tacoma to haul stuff around.

Check around at some of your local savage yards and you may find one for a few dollars.
 
Located in San Diego, CA. I am selling (2) brand new bilstein 5100 adjustable front shocks. Part #23-249370. Fits 03-09 4runner 4x4. Asking $180 firm for both. Prefer local, no shipping at this time. PM if interested. Text at 772 776 1141 for faster response.

-Sunny
e73947e7fb2774191defba111ea4ce15.jpg
2616324b188be3a9137908494e90e45e.jpg
a60ecbd464527cae0aa37c74558a0f21.jpg
 
I still have a set of OEM headlights off an '05 Limited. Willing to ship or deliver if semi-local. Let's call it $125 OBO, plus shipping (or not).
 
WTB UCA's to correct Algnment for ~3" lift

Looking to buy some UCAs that are used but good condition to correct alignment after 3" lift.

Thanks in advance.
 
Looking to buy some UCAs that are used but good condition to correct alignment after 3" lift.

Thanks in advance.

I have 2 stock UCA's from a 2008 Sport that I could part with. The UCA's themselves are in good condition, no rust. One of the rubber boots is slightly torn from removing them on one of the UCA's. The ball joints are in good condition though because the torn boot happened when I removed them. One ball joint reboot and you should be good to go.
 
Last edited:
I have 2 stock UCA's from a 2008 Sport that I could part with. The UCA's themselves are in good condition, no rust. One of the rubber boots is slightly torn from removing them on one of the UCA's. The ball joints are in good condition though because the torn boot happened when I removed them. One ball joint reboot and you should be good to go.

Unless they're adjustable stock UCA he's looking for something that has adjustability because you lose caster when lifting over 3"
 
Meet up in Sacramento, but willing to ship for the right price (and if I can source a box in a timely manner).

Have FJC Moog 81108's for sale and OME 895's.
- Moog 81108s have around 15k miles on them. No issues, just wanted to go with OME 886's. Asking $60 or OBO.

- OME 895's are practically new in box, with virtually no miles on them. Asking $140 or OBO. Opted to go a different route in the rear.

4th gen Limited Running boards, went to rock sliders, so no need for these... $100 or OBO. Pulled off at 115k mi.
 
SOLD

Bilstein 5100s with Toytec Springs

30k miles - 200 miles on forest service roads. With 14" 620 lb Toytec/ Eibach springs and 1/4" spacer for driver lean. Only took out to install adjustable coilovers. Set to lowest height setting but should be good for 1.5" as is. I can adjust height if asking price is paid.

For GX470, 4th gen 4runner, FJ cruiser Cruiser and possibly 3rd gen tacoma.

$225 local exchange only. Grand Terrace on weekdays and Riverside weekends and evenings.
1b663c578f3d8d3b30aa71b9a21a3474.jpg


Sent from my SAMSUNG-SM-G891A using Tapatalk
 
Last edited:
Bilstein 5100s with Toytec Springs

30k miles - 200 miles on forest service roads. With 14" 620 lb Toytec/ Eibach springs and 1/4" spacer for driver lean. Only took out to install adjustable coilovers. Set to lowest height setting but should be good for 1.5" as is. I can adjust height if asking price is paid.

For GX470, 4th gen 4runner, FJ cruiser Cruiser and possibly 3rd gen tacoma.

$225 local exchange only. Grand Terrace on weekdays and Riverside weekends and evenings.
1b663c578f3d8d3b30aa71b9a21a3474.jpg


Sent from my SAMSUNG-SM-G891A using Tapatalk[/QUOTE
What did you have them on?
 
2008 SR5 Rims, Restored, Powdercoated Mirror Black

HI T4R 4th Genners!
Anyone interested, and live in the Central NJ area? What price should I ask for these? They're in nice shape. No chips, great looking finish. The only real flaw is that 2 of the rims required a lot of weights to get balanced.

original_SR5rims.jpg
 
Last edited:
Bilstein 5100s with Toytec Springs

30k miles - 200 miles on forest service roads. With 14" 620 lb Toytec/ Eibach springs and 1/4" spacer for driver lean. Only took out to install adjustable coilovers. Set to lowest height setting but should be good for 1.5" as is. I can adjust height if asking price is paid.

For GX470, 4th gen 4runner, FJ cruiser Cruiser and possibly 3rd gen tacoma.

$225 local exchange only. Grand Terrace on weekdays and Riverside weekends and evenings.
1b663c578f3d8d3b30aa71b9a21a3474.jpg


Sent from my SAMSUNG-SM-G891A using Tapatalk
I want
 
OEM Rack crossbar hardware

Looking to get some hardware for my OEM cross bars. The knobs and threaded plate that secures the cross cars to the side rails.
Or if you have complete crossbars you no longer need :eyebrows:
The stealership just isn't worth it.
Thanks!
 
Looking to get some hardware for my OEM cross bars. The knobs and threaded plate that secures the cross cars to the side rails.
Or if you have complete crossbars you no longer need :eyebrows:
The stealership just isn't worth it.
Thanks!
I have the crossbars (2) from my 2006 Sport Edition if you're interested.
 

Forum statistics

Threads
278,312
Messages
3,554,087
Members
248,016
Latest member
Advally Service

Trending content

Back
Top