4th Gen specific for sale thread
- Thread starter wadle5
- Start date
he replies to FB messages on messenger. fantastic service and product - ive been using the knucklebone carrier by them for awhile now.
teotwaki
Senior Member
SOLD to Warr-Runner
Updated with As-Is photos in the attachments
Front Skid 3/16" Steel from Downey Offroad - Orange County, California. Local pickup only.
This was production number 1 many years ago as I loaned them my 4th Gen for fitment trials. I recall that it started as a skid for the Tacoma but they modded it for 4Runners so fitment is not razor perfect. Bolts attaching to the 4Runner are metric. All others are SAE inch.
It is USED, scraped, not dented but it sure saved my 4Runner quite a few times. The original finish was nickle but now has some small rust patches so clean it up and paint it black would be a good approach. I believe I have all of the hardware but some of the bolts should be replaced. We can install it in my driveway so you can see how it all goes together. I had a brass Fumoto valve for my 4th Gen's oil pan so all I had to do was reach in and flip the lever for an oil change.
This embedded picture is from when it was fairly new.
I took some photos of the current condition of the skid and it still looks decent. All of the bolts, brackets and adapters appears to be present and are in one of the photos.
Updated with As-Is photos in the attachments
Front Skid 3/16" Steel from Downey Offroad - Orange County, California. Local pickup only.
This was production number 1 many years ago as I loaned them my 4th Gen for fitment trials. I recall that it started as a skid for the Tacoma but they modded it for 4Runners so fitment is not razor perfect. Bolts attaching to the 4Runner are metric. All others are SAE inch.
It is USED, scraped, not dented but it sure saved my 4Runner quite a few times. The original finish was nickle but now has some small rust patches so clean it up and paint it black would be a good approach. I believe I have all of the hardware but some of the bolts should be replaced. We can install it in my driveway so you can see how it all goes together. I had a brass Fumoto valve for my 4th Gen's oil pan so all I had to do was reach in and flip the lever for an oil change.
This embedded picture is from when it was fairly new.
I took some photos of the current condition of the skid and it still looks decent. All of the bolts, brackets and adapters appears to be present and are in one of the photos.
Attachments
Last edited:
blackoutt
New member
Just sent them a message on FB since I haven't found a cheap used Wilco yet still.
OLYMPIA, WA area. Some of this I'll ship, some obviously I won't.
PLEASE PM ME WITH INTEREST.
AT LEAST QUOTE MY POST SO i GET NOTIFICATION.
Tan cloth 2007 seats. Includes all head rests, 9.5/10 condition. No holes, no stains, no smells, non-smoker. Front AN rear seats. $300 obo
Grey interior plastic. Seat belts, visors, a pillar, b pillar, dash cover, see photo. All pieces an some not seen available.
Limited an SR5 door on the dash. $20 for regular, $40 for limited.
PLEASE PM ME WITH INTEREST.
AT LEAST QUOTE MY POST SO i GET NOTIFICATION.
Tan cloth 2007 seats. Includes all head rests, 9.5/10 condition. No holes, no stains, no smells, non-smoker. Front AN rear seats. $300 obo
Grey interior plastic. Seat belts, visors, a pillar, b pillar, dash cover, see photo. All pieces an some not seen available.
Limited an SR5 door on the dash. $20 for regular, $40 for limited.
Attachments
Last edited:
Where are you roughly? I'm in Portland area enough.
momo.75
Registered User
I had that issue when I ordered my Demello bumper. I have an '03 but had switched to a '06-'09 grill and headlights. When I ordered my bumper I ordered it for a -03-05. It wouldn't close either. I ended up trimming the bottom of the grill and the corners till it fit. Works just fine now. If you are interested shoot me a pm with your number and I will text you some pics.
RazzRoach
New member
eibach pro lift kit
Selling my Eibach Pro Lift kit.
Only put 1000 miles on it.
PRO-TRUCK LIFT SYSTEM (Stage 1) - 2009 TOYOTA 4Runner 2WD/4WD w/X-REAS
List price is $831
Looking to get $650
Located in Orange County California. Not willing to ship must be local pickup
Selling my Eibach Pro Lift kit.
Only put 1000 miles on it.
PRO-TRUCK LIFT SYSTEM (Stage 1) - 2009 TOYOTA 4Runner 2WD/4WD w/X-REAS
List price is $831
Looking to get $650
Located in Orange County California. Not willing to ship must be local pickup
Anybody need factory roof rack parts? I removed my standard rack today. Most of the end caps have slight damage but are usable/repairable if someone is interested I can get pics. Will basically send these to someone who needs or wants them for shipping costs.
Also have the rails and crossbars I would sell cheap. Let me know if interested. I will split up as needed.
PM is best please.
Sent from my iPhone using Tapatalk
Also have the rails and crossbars I would sell cheap. Let me know if interested. I will split up as needed.
PM is best please.
Sent from my iPhone using Tapatalk
I have a set of 06 headlights for sale. Pic below shows them on the 4Runner before I swapped them for smoked ones. They have since been polished and are in good condition with no broken tabs or leaking issues. I can send more pics if wanted.
Make an offer?
Sent from my iPhone using Tapatalk
Make an offer?
Sent from my iPhone using Tapatalk
Attachments
I am selling a Gobi Stealth Rack with two of the Gobi cross bars and a custom fairing I made to cover the whole top of the roof rack. This is the full size roof rack that has no sunroof opening. I've attached a link to Gobi's website for it. Price is $1100.
GOBI Toyota 4Runner 4th GEN Stealth Rack Multi-Light Setup
The roof rack is in great condition and the wiring for light bars has never been used. I used the rack only two times in the last three years so I went back to the stock roof rack. Hit me up if you have any questions. I would like to sell this locally due to size and weight. Thanks!
PS: If anyone has an extra front driver side stock roof rack cap/cover I'd love one cause I broke mine.
https://www.toyota-4runner.org/3322478-post3236.html
firefoxed
New member
PM sent re seatbelts
Az4runnin
Senior Member
Attachments
Last edited:
Satoshi style black laser cut letters. "TOYOTA" included.
$60 an freight new, $30 shipped for these USPS first class.
Epoxied on. Used a torch to weaken the epoxy an removed these without damage. Save a few bucks. Pic available removed or installed, PM me please, pics on phone an I'm slacking.
$60 an freight new, $30 shipped for these USPS first class.
Epoxied on. Used a torch to weaken the epoxy an removed these without damage. Save a few bucks. Pic available removed or installed, PM me please, pics on phone an I'm slacking.
