4th Gen specific for sale thread

[Mr. Banks]

Grill

Bumping this back up. I'll do $325 with shipping included. It's on eBay, but would rather cut a deal to a T4R member.

You got a deal. Pm sent!

 

[JONBOY345]

I'm looking for the "upper cover" part #17705-50161 for a v8. It is number "2" in the diagram attached. I managed to break where one of the clips attaches while doing the HCF delete and don't wanna fork out $300 for a new one from the factory.

Thanks!

car-part.com, plug in your vin and search for the part.

 

[joevan]

2006 lca

I have a pair of used 2006 LCA in Ct. for $80
Bushings still in them but are shot
Ball joints about 2 yrs old.

 

[joevan]

WTB a roof rack

Looking to get some type of aftermarket roof rack for my sons 4runner.
In New England NY or NJ.
Thanks
Joe

 

[joevan]

WTB Skid Plate

Looking for a aftermarket skid plate or factory one for my sons 4runner.
Ours has a few rust holes in it.
New England NY or NJ.
Thanks
Joe

 

[NativeRunner]

I'm looking for the "upper cover" part #17705-50161 for a v8. It is number "2" in the diagram attached. I managed to break where one of the clips attaches while doing the HCF delete and don't wanna fork out $300 for a new one from the factory.

Thanks!

I have a factory intake off my 03 V8, great condition HCF deleted, Just replaced w/aftermarket

 

[Forum148]

I have a factory intake off my 03 V8, great condition HCF deleted, Just replaced w/aftermarket

PM sent!

 

[Berty_K]

Anyone in the Chicagoland area interested in buying my custom drawer setup? Asking for cost of raw materials: $450

Specs:
-Width: 41”
-Length: 35”
-Height: 11”
-Two drawers
-3/4 inch plywood all around
-includes plywood sleeping platform (low tech, but gets the job done)
-27” drawer slides (150 lbs capacity)
-Turnbuckles to keep things in place
-Ruggedized rubber top

 

[81runner]

Anyone in the Chicagoland area interested in buying my custom drawer setup? Asking for cost of raw materials: $450

Specs:
-Width: 41”
-Length: 35”
-Height: 11”
-Two drawers
-3/4 inch plywood all around
-includes plywood sleeping platform (low tech, but gets the job done)
-27” drawer slides (150 lbs capacity)
-Turnbuckles to keep things in place
-Ruggedized rubber top

If you were willing to ship, I'd be all over this!

 

[Izlu]

FOR sale from my 2006 Sport Edition.

Hoping to sell as a bundle.
Sport tube step, tube roof rails, and rola rack basket with extension, on 4xinnovation low pro mounts.

The tube rack and steps are sprayed with black rustoleum. In good shape for it being a 2006. Also two crossbars for the tube rack.

The rola rack basket was purchased 7 months ago. The front decal is starting to fade and peel. The back sticker is starting to peel but overall in great shape.

Located in SF Bay Area. Looking to get $500 obo for everything. Not looking to ship anything.

The roof rails and rola rack are still on my car. I took off the tube steps and added sliders.

Thanks

Might be interested in tube steps and roof rails should you decide to ship.

 

[keada714]

Anyone in the Chicagoland area interested in buying my custom drawer setup? Asking for cost of raw materials: $450

Specs:
-Width: 41”
-Length: 35”
-Height: 11”
-Two drawers
-3/4 inch plywood all around
-includes plywood sleeping platform (low tech, but gets the job done)
-27” drawer slides (150 lbs capacity)
-Turnbuckles to keep things in place
-Ruggedized rubber top

Very nice setup!! Would be interested if you were local!

 

[Boort]

Might be interested in tube steps and roof rails should you decide to ship.

LOL Shipping to Mongolia might be cost prohibtive eep:

 

[Zed33]

I've got a set of front spacers from rough country 2" with nuts. Also FJ front struts/springs. I can take the springs off if needed, struts are either blown or they just couldn't handle my ARB bumper (bought the 4runner like this). Throw me an offer. I'm willing to ship but for the fronts expect to pay a pretty penny for shipping.

 

[Izlu]

LOL Shipping to Mongolia might be cost prohibtive eep:

It sure is but I have a freight forwarder in LA, 90005 who ships goods cheap to here :becky:

 

[trey99ek]

I just traded my 4th gen in. Took off a few parts and had some extras.

AVS stick on visors (new, has a few extra ones) 30
OEM Oil Filters (5), SOLD
Afe pro dry filter. V6. 30
Weathertechs Front and Rear (black), SOLD
3d printer cupholders with inserts. 50
Duralast CV shafts New. 40

All prices are plus shipping.

Located near Williamsport, PA


Sent from my SM-G960U1 using Tapatalk

 

[Bluesky 07]

I just traded my 4th gen in. I have a set of the custom 3d cupholders with double insert. Front an rear weathertechs, afe ait filter and 5 new oem oil filters.

Sent from my SM-G960U1 using Tapatalk

Location & prices?

 

[trey99ek]

Location & prices?

Updated, sorry was at work and got buddy when posting.

Sent from my SM-G960U1 using Tapatalk

 

[mysticz]

Overland Warehouse Radflo 2.5 For Sale

4th Gen 4Runner Overland Radflo 2.5 Coilovers with Resi 700lb. coils has been sent to Radflo to be serviced in the pass week and has new bearings and shafts. Asking $800 for pair plus shipping.

Rear is available and can be sent to be rebuilt at Radflo if you want but will be an extra cost.

Both are Overland Warehouse's design who worked side by side with Radflo to create the perfect setup for the 4th gen 4Runner. Unfortunately they close the business a year after and only a limited amount of the 2.5 and 2.0 Radflo setups were sold.

This Coilover set is the first and only external resi model they made, which came off one of the founders 4Runner after he SAS'd his rig.

Overland Warehouse Closes - Toyota 120 Platforms Forum

Overland Warehouse Suspension kits - Toyota 120 Platforms Forum

Also available Overland Radflo 2.5 Ext Travel Rear Shocks $200.

 

[chaincleaner]

All components have been completely removed down to the last bolt and fastener
And are available
Still available:


Aftermarket suspension parts:
Total chaos UCA’s $450
Icon 2.5 rear shocks with reservoirs $450 ( used for photo shoot on a weekend wheeling trip)SOLD
Walker Evans 2.0 rear shocks with reservoirs and adjusters $450 (New)
Rear 1.5” Daystar spacers (new)

Hi, for the UCA's do you have the the full hardware kit and bushings? How many miles on the UCA's? Thanks!

 

[galacticRunnerv8]

LOL Shipping to Mongolia might be cost prohibtive eep:

Lol would you be willing to ship to Michigan by any chance? Very interested