taxzz
New member
JVC got it with the fact that they are better than OEM. The quality is really nice for the price. no real need for something like RCI unless you have money to burn or really expect to have a lot of rock hits.
4th Gen specific for sale thread
- Thread starter wadle5
- Start date
JVC got it with the fact that they are better than OEM. The quality is really nice for the price. no real need for something like RCI unless you have money to burn or really expect to have a lot of rock hits.
techno
New member
Sorry, someone bought it yesterday. But to answer your question, the Gibson component connections are all sleeved with U-Bolt clamps. The system mates to the factory y-pipe using the factory donut style gasket.
gimlithepirate
New member
Elephant Hill was kind of my limit, which is why I'm looking at these more seriously. My main issue is it precludes a true transfer case skid, but that may be my paranoia talking.
Syr4RinNC
New member
Bummer should have jumped sooner
JuniorPigeon
New member
Not exactly 4th gen specific BUT I just got new wheels and tires, so it's time for these to go! Hopefully before I move on the 19th :yo:
- (5x) KMC 301 Turbines 17x9 -12 wheels: Pictures are fitment on my 4th gen with no spacers. Some light trail rash here and there but nothing some semi-gloss black won't take of. Custom made center caps I did using stainless Gorilla hub covers and OEM TRD caps. Substantially nicer than the KMC caps.
- (5x) Cooper STT Pro 295/70-17 tires: Tons of life left in these bad boys. Three of them are 70% minimum and the other two are much newer. These did amazing off-road, even here in the lame KY mud. These weren't bad on road either, road noise is low for a M/T.
Asking $1,500 OBO! Comes with all 27 black splined lug nuts. Located in Louisville, KY. No shipping, unless at your expense which I'll assume isn't worth it lol. Really, make an offer!
- (5x) KMC 301 Turbines 17x9 -12 wheels: Pictures are fitment on my 4th gen with no spacers. Some light trail rash here and there but nothing some semi-gloss black won't take of. Custom made center caps I did using stainless Gorilla hub covers and OEM TRD caps. Substantially nicer than the KMC caps.
- (5x) Cooper STT Pro 295/70-17 tires: Tons of life left in these bad boys. Three of them are 70% minimum and the other two are much newer. These did amazing off-road, even here in the lame KY mud. These weren't bad on road either, road noise is low for a M/T.
Asking $1,500 OBO! Comes with all 27 black splined lug nuts. Located in Louisville, KY. No shipping, unless at your expense which I'll assume isn't worth it lol. Really, make an offer!
HOJeepster
New member
Skid plates > bumpers.
The only modifications I deem necessary for offroading are good tires, sliders, and a set of skid plates. The rest is mostly for show.
I'd go RCI aluminum.
taxzz
New member
What do you mean 'true' TC skid? because of how the ARB one mounts?
gimlithepirate
New member
Yeah, I mean a skid that actually protects the transfer case and electronics as opposed to the little thing that stick on the lowest part of the case.
Agree that Skids > Bumper. Only reason I am even looking at a bumper is the fact that mine came pre-squashed xD Otherwise it would not be a priority at all.
FS: 4th Gen Leather Steering Wheel - No Controls
Just replaced the leather steering wheel in my 2008 Limited with an aftermarket one so I have this one if anyone is interested. It has some wear and NO controls or airbag.
$40 plus shipping
Just replaced the leather steering wheel in my 2008 Limited with an aftermarket one so I have this one if anyone is interested. It has some wear and NO controls or airbag.
$40 plus shipping
Attachments
Last edited:
VulgarWizard
New member
Not sure if this is the right place to post, but I'm looking for a 2006 door actuator and a drivers side taillight. I'm located in Los Angeles if anyone happens to have either of these.
81runner
New member
Try searching ebay for these, lots of salvage yards nowadays with eBay pages...just my .02. good luck
VulgarWizard
New member
I'll definitely check ebay out. I was just hoping someone local might have the parts on hand.
FS: Toyota 4th Gen 4Runner Dobinsons GS59-705 0-2.5" Lift Rear Shocks - Black
SOLD - This post is for a set of Toyota 4Runner Dobinsons GS59-705 0-2.5" Lift (Comfort Valved) Rear Shocks - Black. They are in Excellent condition, being mounted for only 3 months. Fits 2003-2019 Toyota 4Runner, and 2006-2016 Toyota FJ Cruiser. Only selling since I needed stiffer suspension for heavy upgrades. I tried to post pics, but they just error out and fail to load. In fact, almost all 4Runner pics I've tried to load just error out, and fail to load. I've attached a link where they can be seen on Facebook Marketplace. Toyota 4th / 5th Gen 4Runner Dobinsons GS59-705 0-2.5" Lift Rear Shocks - Black - Car Suspension & Steering - Misty Mountain, Georgia | Facebook Marketplace
$200
SOLD - This post is for a set of Toyota 4Runner Dobinsons GS59-705 0-2.5" Lift (Comfort Valved) Rear Shocks - Black. They are in Excellent condition, being mounted for only 3 months. Fits 2003-2019 Toyota 4Runner, and 2006-2016 Toyota FJ Cruiser. Only selling since I needed stiffer suspension for heavy upgrades. I tried to post pics, but they just error out and fail to load. In fact, almost all 4Runner pics I've tried to load just error out, and fail to load. I've attached a link where they can be seen on Facebook Marketplace. Toyota 4th / 5th Gen 4Runner Dobinsons GS59-705 0-2.5" Lift Rear Shocks - Black - Car Suspension & Steering - Misty Mountain, Georgia | Facebook Marketplace
$200
Last edited:
Izlu
New member
I'll take them, how much is shipping to 90005-2517?
JD914
Member
Lemme work on that for you. I’ll DM you with a cost tomorrow.
Sent from my iPhone using Tapatalk
Fern
New member
Seconds
FREE pair of 4th gen 03-05
headlights. Good condition, no broken tabs, no cracks, although there’s an OME sticker baked onto one. Includes all bulbs.
Buyer pays shipping.
Sent from my iPhone using Tapatalk
JD914
Member
FYI, I just realized (not sure if you noticed it in the photo) that I’m missing a low beam bulb holder. Sorry for the inconvenience.
Original post updated.
Sent from my iPhone using Tapatalk
I can really use them if the deal falls through. Mine are held together with JB weld right now. Just bought the truck two weeks ago and didn't know until I was cleaning up things and pulling covers... ��
I'd have um shipped to my dude in Texas to have projectors retrofitted and the lenses restored.
I'd have um shipped to my dude in Texas to have projectors retrofitted and the lenses restored.
