4th Gen specific for sale thread

[Bluesky 07]

@%1;

I'll pay shipping to my local ups store. I can't find one locally. Can't imagine it is too bad. May need to discuss the hardware. I think my tabs on the wheel well are different and all.

Note to thread readers: forgive the back and forth but this member doesn't have the posts to PM yet.

Here it is flat:

Here are the dimensions. The ~25.5" is to the headliner though it's not shown in the pic. I forgot to measure the width available on the upper shelf but it's just whatever the width is above the wheel wells.

This is where the bottom of the shelf knob fits in to lock it.

This is underneath the raised shelf.

This is the tag with weight limitations:

FWIW, I'm not exaggerating to say the shelf is like new. I don't think I've used it more than twice in the time I've had the truck and I have cargo mats covering the carpet.

 

[Wile Kyote]

Thank you bluesky! Very much apologize to the other members. Hope to have my post count up enough to PM, but without posting complete crap.

Bluesky, very much interested if you are. I would need all the associated hardware and can include mine with the trim piece. Will need to confirm, but I would like to believe that the hardware is an easy swap. Believe I can include the cargo net as well if interested. I have the cargo hooks instead of the inserts. My 4R goes in on Monday for tinting, and then I need to gut the head liner to replace the sunroof. I can gut it in that process if you're interested.

 

[Bluesky 07]

Thank you bluesky! Very much apologize to the other members. Hope to have my post count up enough to PM, but without posting complete crap.

Bluesky, very much interested if you are. I would need all the associated hardware and can include mine with the trim piece. Will need to confirm, but I would like to believe that the hardware is an easy swap. Believe I can include the cargo net as well if interested. I have the cargo hooks instead of the inserts. My 4R goes in on Monday for tinting, and then I need to gut the head liner to replace the sunroof. I can gut it in that process if you're interested.

Can you post a pic of your cargo compartment showing the wheel wells and the trim piece you would be sending?

 

[Wile Kyote]

Here is what I have Bluesky, guess in practicality, it would just be the mounts on the wheel well. You got lucky with the whole option including the retractable cover.

 

[Bluesky 07]

Here is what I have Bluesky, guess in practicality, it would just be the mounts on the wheel well. You got lucky with the whole option including the retractable cover.

Just to confirm, that’s the gray interior, right? Looks like it but the light is tricky there for color. I think you said gray before.

Do you smoke in your truck or have dogs back there where that trim piece is? Just being straight, can’t do this if that’s the case, my wife has serious allergies.

 

[Wile Kyote]

Yes sir to the color. I just bought this car. Picked it up last week so I can't speak much on the previous ownership. I do not smoke, nor do I appreciate the smell so I don't notice any smoke smell in it so my guess is no. I also do not see any dog hair. I can febreeze it if you'd like this week just to be safe before gutting it.

Also... can PM you now. Sorry everyone. Thanks for enduring.

 

[spdrcr29]

FS: Set of 4 Bilstein 5100's & 2007 FJ Cruiser Springs Blasted and Powdercoated

Hey all, i've got a full set of brand new and in the boxes Bilstein 5100's. P/N's for the shocks are 24-239370 and 33-187174. Also included are front and rear 2007 FJ Cruiser Springs that have been blasted and powdercoated in gloss black. Will not sell individually. What you see is what you get. $700 shipped obo. Thanks.

 

[ChrisMo757]

WTB: OEM front skid plate

I know it's a hard thing to find, but I am still looking for the cosmetic aluminum skid plate for a 4th gen. If you don't have the plate itself but have the brackets & hardware, I would take just those. PT# 212-89070.

 

[mduganjr]

I just bought a 2006 4Runner last week. I saw that shelf in the back and had no idea what it was! I feel stupid now for not realizing that is what it was for.

Learning already.

 

[Bluesky 07]

I just bought a 2006 4Runner last week. I saw that shelf in the back and had no idea what it was! I feel stupid now for not realizing that is what it was for.

Learning already.

Hope you find a use for it. This is one of the few times I did. I could stack things under and on the shelf then hang the longer items out the back window. These are the materials we used to install a 400 square foot beadboard ceiling.

 

[AuSeeker]

Hope you find a use for it. This is one of the few times I did. I could stack things under and on the shelf then hang the longer items out the back window. These are the materials we used to install a 400 square foot beadboard ceiling.

Where's the beadboard, all I see in baseboard, crown molding, maybe some 1/4 round or panel trim, and some 1Xs?

 

[Bluesky 07]

Where's the beadboard, all I see in baseboard, crown molding, maybe some 1/4 round or panel trim, and some 1Xs?

There are 20 4x4 panels stacked inside, which leads me to believe I was mistaken about using the shelf for this. I think they were in one stack. Zoom in at the lower right corner of the window.

 

[mcbru]

I've got brand new Toyota OEM 5th gen front calipers for sale. Excellent upgrade for our 4th gens.

These are the calipers for an early 5th gen, so they are a bolt-on affair. You need 5th gen rotors to complete the setup. Pads are the same.

Left caliper: 47750-60300
Right caliper: 47730-60300

Located in Mooresville NC. Paid $325 to the door, will take 275. Please contact me via PM.

 

[wicket27]

Limited Running Boards for pickup

Whats up! took my running boards off my 03 limited while waiting for my rock sliders to be ready. They are in the kinda off gold color and have puddle lights. Free for pickup in santa cruz, CA!

 

[stopthefury]

I know it's a hard thing to find, but I am still looking for the cosmetic aluminum skid plate for a 4th gen. If you don't have the plate itself but have the brackets & hardware, I would take just those. PT# 212-89070.

NEW OEM TOYOTA TUNDRA & SEQUOIA FRONT SKID PLATE | eBay

 

[rdruss]

Have like new front strut KYB top hats SM5640 and Daystar 1" spacers. The top hats have the extended studs installed for use with these spacers.
$90.00 for all shipped to continental US address.
PM me for pictures or to purchase.
Thanks, Ron

 

[ChrisMo757]

NEW OEM TOYOTA TUNDRA & SEQUOIA FRONT SKID PLATE | eBay

The brackets are different for the Tundra/Sequoia. I can buy the skid plate but need the brackets.

 

[vonRunner]

I have the following items available which all came off my 2006 4Runner. I'm located in the Huntington Beach area of Orange County. Feel free to shoot me offers on anything you might be interested in.
- Factory Sport Edition roof rack w/ all hardware
- Factory front bumper w/ factory fog housings and all hardware/supports (silver)
- Rancho RS999760 front shocks (less than 5,000 miles on them)
- Rancho RS999305 rear shocks (less than 5,000 miles on them)
- Factory upper control arms
- Eibach pro rear lift springs +1" (2,000 miles on them) - SOLD
- Factory V8 weight distribution tow hitch - SOLD

 

[mcbru]

Got a set of Toytec lift springs for sale.

Front: 112620 (2.5" on bottom perch of 5100s)
Rear: RCC2.0 (2")

$200 takes it all or $120 per set.

Location Mooresville NC.

Photos
Toytec Springs - Google Photos

 

[vonRunner]

Anyone want to trade rear hatch spoilers? I have a 2006 sport edition (the larger spoiler) in silver. Looking for the smaller spoiler in silver if anyone wants to trade. Mine is in good condition (no faded paint, cracks, or dents). I'm in southern California.