5th Gen For Sale/Wanted Thread

[mr. samster]

I have a used set of Toytec 1 inch front spacer lift. This is the bottom spring perch that is used with Bilstein shocks. Part number is 90513. Selling it for $100 shipped. $80 picked up So Cal

Sent from my Pixel 3a XL using Tapatalk

 

[sleepsontoilet]

I have a set of OME895e in the Houston area if anyone is looking for a set. They came with my 5100s kit and the rear squatted too much after adding a full bumper with the front shocks on the highest lift setting. Ended up swapping in a set of Icon lifted coils and a cornfed spacer. They have maybe 50 miles of use on them, just to the alignment shop and back.

 

[Dbentley]

Looking to buy chrome exterior door handles w/o smart key. Really only need to buy just the passenger front. Handle broke off!

I believe I still have my chrome door handles I switched out for the trail flat black....They're from a 2011 and have been in storage for several years now. I'll grab them after work and send ya some photos.

 

[drsogr1]

I believe I still have my chrome door handles I switched out for the trail flat black....They're from a 2011 and have been in storage for several years now. I'll grab them after work and send ya some photos.

Sorry man....I went ahead and ordered it. Going without a door handle sucks.

 

[gman13579]

In search of a 2014+ T4R 5th Gen

Looking for 5th gen (2014+ with the facelift) T4R. Looking to spend under 25k total. Willing to travel. Clean titles only. Motivated buyer. Mods okay. 4x4 only no RWD

 

[just_n]

FS in ATX - Gobi Stealth Multi Light w Sunroof cutout & Insert

Purchased from and installed by Rack Outfitters here in Austin, more than I needed so I went back to my factory rack.

I think I have driven maybe 500 miles with it on, still in excellent shape.

GOBI Stealth Multi-Light Setup with Sunroof - $1595
Sunroof Insert - $250
Rear Gas Shocks - $125

I paid $2460 including installation and tax, asking $1850 OBO.

Local pickup in ATX.

 

[412Runner]

I have the following available in Seattle, WA. All parts have 2500 miles on them and are off my 2020 4Runner Venture Edition purchased in January

1. OEM Rear Springs - $100
2. OEM UCAs - $200
3. Bilstein 5100 front shocks with OEM springs - $250, or $350 if you want the whole kit (#3 and #4)
4. Bilstein 5100 rear shocks - $150, or $350 if you want the whole kit (#3 and #4)
5. 4 TRD Pro Wheels in the Gunmetal Grey color. No Tires or TPMS - $700
6. Yakima Roof Basket w/Rails - $400

Local Pickup Preferred in Seattle area. Will ship at 100% buyer expense (except #6).

 

[Louisiana Overland]

WTB 5th Gen Aftermarket UCA

Im looking for a set of aftermarket upper control arms for a 5th gen 4runner. These will be pit on a truck with a 3” lift so they need to be adjustable enough to accommodate an alignment on that.

 

[Bcoz4rn]

$60 only used for 2-3 miles. From dealer to my home !
Sold !

 

[sonjason]

“Blacked out” rear hatch emblem molding. Previous owner sprayed with a textured paint I believe. I replaced this with the factory trail version as I am not doing the black out look. $50 plus shipping from 28786. Box info is 30x15x5 and 3 pounds 4 ounces if you want to get a USPS quote.

I accept PayPal. PM me if interested.


Sent from my iPhone using Tapatalk

 

[ElJefe]

After trying to buy a CARB sticker from the dealer who referred me to the MDC who referred me back to the dealer, I decided to make my own.

I'm just looking to recoup the cost of making the stickers, I've got 4 available at $5 shipped per sticker.

This really only applies to California folks so I'll give those people preference, send me a PM if you need one!

Hi,
Do you happen to have any more of these or know where I can get one? Juts picked up a TRD intake but need the CARB sticker.

Thanks

 

[Akkording]

I have a set of OME895e in the Houston area if anyone is looking for a set. They came with my 5100s kit and the rear squatted too much after adding a full bumper with the front shocks on the highest lift setting. Ended up swapping in a set of Icon lifted coils and a cornfed spacer. They have maybe 50 miles of use on them, just to the alignment shop and back.

price?

 

[A10MileHusker]

FS: TRDOR carpet mats Never been used. $100 Shipped OBO

 

[T3XAS4Runner]

Purchased from and installed by Rack Outfitters here in Austin, more than I needed so I went back to my factory rack.

I think I have driven maybe 500 miles with it on, still in excellent shape.

GOBI Stealth Multi-Light Setup with Sunroof - $1595
Sunroof Insert - $250
Rear Gas Shocks - $125

I paid $2460 including installation and tax, asking $1850 OBO.

Local pickup in ATX.

PM'd

 

[K9overlanding]

5th gen Toyota 4Runner Modular Storage Panel Shelf

For Sale:
A brand new never used 2010-2019 5th Gen Toyota 4Runner Modular Storage Panel Shelf... Shelf Only.

Purchased in February for $332... selling for $300 firm.

Will ship on buyers dime... located in the greater Phoenix, AZ area.

No Tax & No Waiting for the shelf to arrive from Rago Fabrication.

Still available...

 

[Tmcleavor]

Multiple OEM and aftermarket parts for sale

I have lots of parts for sale in the Santa Fe area.
I can ship at buyers expense as well.

Stock black trim non-JBL entune radio. $450
Never used black trd floor mats. $100
OEM front and rear shocks and springs (15k miles)$250
Brand new bilstein 600lb front springs. These came with the 6112 shocks. They are 10% stiffer than stock($100)
OEM UCAs $200
All items are OBO.

 

[K9overlanding]

Pelfreybilt Aluminum front bumper... Phoenix AZ

Located in the Greater Phoenix Arizona area
Pelfreybilt Aluminum front bumper $1000 as is...

Front mounting points have small cracks. Will need to be welded. See photos for cracks & location.

Weight == 67 lbs.
Will ship at buyers expense.

NOTE: Light Bar Not Included.

 

[perf0rmance]

Hello everyone, long time lurker but you guys have helped me navigate through my 4Runner build over the years and have learned a lot here. Thanks.

Long story short, I'm selling my BP51 kit (not rebuilt) and ICON UCA's that have been rebuilt 6 months ago with the Delta Joints. I'll let the pics do the talking. The gear is working well, very smooth rides although a bit firmer than factory (left factory settings, you have adjust-ability both ways), no issues, no complaints. Selling because I've outgrown the kit with bumpers front and back and swapped for the Kings all around with the HD springs. Gear is about 4 years. Let me know if you have any questions.

I have it posted locally also.
-BP51 asking $2200.
-ICON UCA with Delta Joint upgrade at $500.

Of course everything is OBO. If anyone reaches out locally from here, we can talk numbers. Listed a bit high for the Craigslist low-ballers.

Selling locally in the DFW area.

UCA's still for sale?
Willing to ship?

What did you upgrade your UCAs with?

 

[bepuvu88]

Looking to trade a Prinsu 7/8th Gen 5 roof rack for a TRD Pro Roof Rack.

Located SLC, UT

 

[honda250xtitan]

Located in the Greater Phoenix Arizona area
Pelfreybilt Aluminum front bumper $1000 as is...

Front mounting points have small cracks. Will need to be welded. See photos for cracks & location.

Weight == 67 lbs.
Will ship at buyers expense.

NOTE: Light Bar Not Included.

Yikes:wave: