5th Gen For Sale/Wanted Thread

[Mudhorn]

Round TRD emblems. $22 shipped
Double sided foam adhesive on back. I used a set on center caps. Set of 4. 3.5” across

 

[97BlackAckCL]

I am selling my add an amp adapter, this is used and I had to cut the trigger wire since it was already run under the carpet to my amp but I can include a blue trigger wire if someone needs one. Most amp kits come with one. This will turn the amp on when the ignition turns to ACC or the truck starts. It also takes the signal from the rear speakers and converts the signal to RCA outputs so you can add an amp. I had this in my 5th gen on the stock radio for 2 years and had no issues. I am only selling because I upgraded the stock head unit and no longer need this adapter. These sell for $39 plus tax on Amazon, I am selling for $30 shipped priority 2 day shipping.

Feel free to PM me with any questions, this is for non-JBL amped head units

https://www.toyota-4runner.org/for-sale-t4r-items/287747-fs-toyota-add-amp-line-output-adapter-$30-pittsburgh-pa.html#post3511320

Bump

 

[RKSTRNR]

WANTED: front bumper in Sacramento area. Im sick of looking at my limited front and want to convert to a trail front end. Hoping someone is putting on a metal front bumper wants some ca$h for their take off. Prefer black, but probably have to get it painted anyways.

Im in Fremont and have a white bumper off my sr5 if you’re interested PM me and I can send pics.

 

[Par02]

TRD Skid Plate - KDSS Modified

Hey all, I have a TRD Skid Plate for sale that I have already modified for KDSS.

I also painted it flat black. It didnt come out as well as I had hoped it would but its a skid plate and .... well I doubt it'd be too noticeable under the truck.

It's actually at a buddy of mines in Longmont Colorado. I shipped it to him so he could have it but his 2014 Trail Edition is so beat up underneath he couldn't install it.

It would probably be best for someone in CO to buy it as shipping it from North Carolina to his place was $89. But if you're not in CO and want it, just know shipping isnt cheap.

The KDSS cuts were done by me. I used the template that I found on here: https://www.toyota-4runner.org/5th-...-skid-15-4runner-te-w-kdss-4.html#post2455455

Here are some picts. PM me if interested!

 

[LIT4R]

I have the following left:

1. GOAT ARMOR - Reduced to $250, a complete steal.

2. Rago waterport mount - Reduced to $50.

3. Rago Molle Panels $225 - Molle bags are sold.

4. Roam awning $180

5. Atomic Monkey headrest fire extinguisher holder $20

6. Black side roof rails, the black caps, and the gaskets for the roof itself. $75

All I have left is the Roam Awning which I'm reducing to $150 local pickup only. If I was to put it back in the box, I could list it as new on ebay. Someone get this thing for a really nice discount, with no lead times. I also have the Rago Waterport Mount, also local pickup only for $40, also a ridiculous price.

Going to keep them until Friday before I just ship them to my friend at cost of shipping.

 

[Akkording]

All I have left is the Roam Awning which I'm reducing to $150 local pickup only. If I was to put it back in the box, I could list it as new on ebay. Someone get this thing for a really nice discount, with no lead times. I also have the Rago Waterport Mount, also local pickup only for $40, also a ridiculous price.

Going to keep them until Friday before I just ship them to my friend at cost of shipping.

I'm willing to pay $50 for the Rago waterport mount shipping through USPS in their priority box, should fit. PM me if you would like me to PayPal you.

 

[enginerd4ni]

FS: T4R5 Cargo Deck Plate and Mounts

Fridge/Stove/Slide sold without the cargo deck plate so now I'm offering just the cargo deck plate system for $600.

Some previous comments from the original posting talked about pricing. Yeah, this is tough one. As I am getting quotes to water jet or laser cut my version 2.0 design, just the raw plate itself without the mounts, PEM inserts, aircraft track, etc. is $600. Part of that is material cost, part of that is machine time. That doesn't even include shipping to my house. Once I add in the custom brackets and supports, fasteners, etc., I'm looking at about $1K in cost not including my design and fabrication time. I think $600 is quite reasonable considering what is on the market and how this is waaayyy more secure than strapping a plate to the factory carpet like some designs do and sell for about the same price.

Video Walkthrough

Deck Plate
Aluminum (raw 6061) deck plate and complete mounting bracket kit for secure multipoint attachment to vehicle body hard points (I use all ten available hardpoints so this thing is bomber). Why aluminum? High strength/weight ratio, superior attachment of threaded fasteners for secure mounting, corrosion resistant and immune to water damage/mold. Feel free to coat with your own choice of liner (Line-X, truck bed liner, etc.) or leave natural. Deck plate has genuine PEM press-in inserts for secure mounting of the two aircraft track rails which allow secure tie down of your gear. There are three positions available for the two rails: left, center-left, and right. These are sized to fit FrontRunner Wolf Pack storage containers and many other common storage options. You can also add your own threaded inserts later if you decide to reconfigure the plate for drawers or something else. This is actually pretty easy to do and I can show you how.

Shipping:
Buyer pays, estimate $200

Installation
I will install for free if you drive to my house near Austin, TX. This should fit any 5th gen 4Runner but I can't guarantee it because I haven't torn down every year and version (SR5, Trail/TRD, Limited, 3rd row seats, slide out cargo tray, backup parking sensor, etc.) but I know it fits the 2013 Trail with slide out cargo tray. That being said, it isn't hard to remove the factory cargo floor and check to see that the hardpoints are in the same spots. Just send me some pictures of the cargo area and I can confirm.
Note that if you plan to run a fridge, it would be wise to run your electrical prior to installation of the deck and slide system. Wiring is obviously not included but I can give you some advice on how to do it. I would also recommend to buy a roll of your favorite sound damping material and we can put that in during the install.


Compare to:
Goose Gear 4Runner Plate System $495 (mounts to existing carpet, made of polymer)
Goose Gear 4Runner Plate System

– AT Overland Equipment

 

[Thedirtrunner]

I sold my truck to a dealer that wants it stock. So I am parting out a whole bunch of stuff:

Things I'm willing to ship:
1. Baja Designs Squadron Sports Driving Combo $175
These are about 6 months old. Comes with both the clear and amber lenses with an extra gasket as well as the wiring harness. I'll throw in an AOR "Bunny Burners" Switch.

2. Rago Ditch Light Brackets - Low profile $50
They are in excellent condition. Can be sold as a set with the Squadrons for $200 - Awesome deal.

3. Black roof rails and 4 factor mounts with gaskets $75
The black rails are a little scuffed as they are used but no dents and can probably be painted over if it bothers you. Still, I think just having the extra mounts and gaskets are worth the $75 alone.

4. Atomic Monkey Fire Extinguisher Holder $20
It holds a fire extinguisher and is in perfect shape.

5. Morimoto 2stroke 2.0 LED headlights $50
Work great, 9 months old.

6. OEM Toyota LED Fogs Black Housings $60
Like new with lamin-x amber films.

Things I may be willing to ship:
1. ROAM Adventure Co. 5 Foot Awning $180
It has been opened twice and is 2 months old. It is practically new.

2. Rago Waterport Mount $60
Might be too heavy to be economical to ship, but depending on where you are, it might be possible.

3. TRD CAI $175
It's 9 months old and in excellent shape. Will ship all the parts.

4. GOAT Armor in Arachnid Black $300
Used with some minor scuffing from use. No pinstripes and they look practically brand new since they are only 3 months old. Has the GOAT head logo on it.

Things that require local pick up/meetup in Downstate NY:
1. Rago Molle Panels Driver and Passenger Sides - Powder coated $225
Some chips and scuffs from use but otherwise in awesome shape. I'll throw in all the molle bags I have.

2. Gobi Ladder $200
Has some scuffs that were immediately touched up with black Delco touch up paint and clear coat. Nothing crazy and no rust. Best of all, no lead times.

3. N-Fab Roof Rack $325
It is fully assembled and loc-tited. It has maybe one scratch on it and looks new.

If you have any questions please feel free to ask.

Do you still have the cai? How much to ship to 92691?


Sent from my iPhone using Tapatalk

 

[Thedirtrunner]

Do you still have the cai? How much to ship to 92691?


Sent from my iPhone using Tapatalk

Jk just went through the thread


Sent from my iPhone using Tapatalk

 

[Jbuckets]

Use this sticky to buy/sell parts for your 5th gen T4R.

To reach the full T4R.org forum, use the Classifieds Section (Classifieds - buy & sell (no commercial ads please) - Toyota 4Runner Forum) and provide a link to that thread here.

thanks

 

[PAKM4N]

WTB: Stock intake for 5th gen 4r

 

[ElJefe]

WTB: Stock intake for 5th gen 4r

FS: 5th Gen Stock Exhaust and Air Intake - $100 each, Los Angeles

 

[PAKM4N]

You rock thanks!

 

[NW.OH.T4R]

WTB: Stock intake for 5th gen 4r

I have one with or without the air filter. Shipping to the West coast may kill the deal though. Feel free to send me a PM.

 

[HerT4R]

Comes with the harness to run it all, all you need is a hot line run from a 12V battery and know how to find a ground. I am willing to just trade your cover for mine (no money needed). lmk.

*cat not included

BUMP!

BUMP!!!

Nobody is doing fridge wiring and wants this solution fo free in trade for your cover?

Or does it really look that bad? Damn. :noidea:

 

[JerseyDevil]

FS: 5th gen Westin grille guard in Southern NJ $500.
Never mounted. Catalog was wrong. Doesn’t fit Nightshade (or Limited). Fits all others. Part number 40-38825. $761 and back ordered on Westin website. All factory hardware, warranty. A few minor scuffs from moving it around my garage. Make a reasonable offer! Text me 856.296.7547.

Sent from my iPad using Tapatalk

 

[Danyo]

SOLD - FN Fx Pro wheels + Falken Wildpeaks P285/70R17 - Los Angeles

Location: Los Angeles/Glendale, CA
(4) FN Fx Pro wheels(matte gunmetal) with Falken Wildpeaks P285/70R17
Lugs and key included. No TPMS.
Tread left: 7/32" per America's Tire tech
Excellent condition (no patches, no wheel rash)

SOLD

 

[krhayes79]

Location: Los Angeles/Glendale, CA
(4) FN Fx Pro wheels(matte gunmetal) with Falken Wildpeaks P285/70R17
Lugs and key included. No TPMS.
Tread left: 7/32" per America's Tire tech
Excellent condition (no patches, no wheel rash)

Asking: $1200

How many miles on them? Are you going back down to stock size?

 

[Danyo]

How many miles on them? Are you going back down to stock size?

~23k miles. Quite the opposite. Decided to go larger... 295.

 

[2016 4Runner SR5]

~23k miles. Quite the opposite. Decided to go larger... 295.

You'll love the 295 I'm running them under mine on FX Pro wheels